바로가기 메뉴
컨텐츠바로가기
주메뉴바로가기
하단메뉴바로가기

PRODUCTS

Incubators

  • HOME
  • > PRODUCTS
  • > Incubators
Incubators

Incubated Shakers (Benchtop)

Digital incubating/ refrigerating benchtop shakers.

with optional dedicated platform and universal attachment

Model Name : IST-3075/3075R/4075/4075R




Control display





Performance

  • Temperature range:
    - Ambient +5°C to 80°C for IST-3075 / 4075.
    - Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R.
  • Competitive high shaking speed up to 500 rpm.
  • Orbital shaking motion in 19mm diameter.
  • Microprocessor PID control.
  • Three point temperature calibration / Automatic tuning.
  • Wide speed range even with heavy workload.
    - Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
  • Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.
    - Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
  • Pleasant test environment by the smooth acceleration and deceleration control.
    - Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
  • High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
  • Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

  • Intuitive touch screen LCD controller with easy icons and logical menus.
  • Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
  • Wide sample monitoring and convenient sample loading.
    - Convenient sample monitoring without affecting inside environment thanks to the three side transparent acryl lid with bright LED lamps.
    - Gas spring lid supports providing smooth motion, soft opening and closing.
  • Repetitive task can be easily performed as the platform stops where it starts.
    - Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
  • Corrosion resistance stainless steel interior.
  • Built-in RS-232 port and USB port for external control and data collection.

Safety

  • Automatic run after power interruption.
  • Temperature and shaking speed deviation alarm.
  • Over-current protection, Stalled platform check.
  • Mechanical over-temperature protection device.
  • Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)
  • Audible and visible open door alarms.
Model IST-3075 IST-3075R IST-4075 IST-4075R

Temperature

Range (℃ / ℉)

Amb. +5 to 80

/ Amb. +9 to 176

Amb. -15 (Min. 15) to 80

/Amb. -27 (Min. 27) to 176

Amb. +5 to 80

/ Amb. +9 to 176

Amb. -15 (Min. 15) to 80

/Amb. -27 (Min. 27) to 176

Fluctuationat 37℃ in flask
(±℃ / ℉)

0.1 / 0.18

Variationat 37℃ in flask
(±℃ / ℉)

0.5 / 0.90

Refrigerator (Hp)

-

1 / 6 HBP

-

1 / 6 HBP

Shaking system

Motion type

Orbital

Amplitude size (mm / inch, dia.)

19.1 / 0.75

Speed range (RPM)

20 to 500

Accuracy

±1% of set speed (>100rpm) / ±1 (≤100rpm)

Timer

1 min. to 999 hr 59 min.

Max. load (kg / Ibs)

10 / 22.0 at 500 rpm15 / 33.1 at 400 rpm

14 / 30.9 at 500 rpm21 / 46.3 at 400 rpm

Dimension

Volume (L / cu ft)

53 / 1.9

83 / 2.9

Platform (W×D) (mm / inch)

350×350 / 13.8×13.8

450×450 / 17.7×17.7

Interior (W×D×H) (mm / inch)

410×410×320 / 16.1×16.1×12.6

510×510×320 / 20.1×20.1×12.6

Exterior (W×D×H) (mm / inch)

440x785x510 / 17.3x30.9x20.1

540x 890 x510 / 21.3x35x20.1

Net weight (Kg / lbs)

65 / 143.3

73 / 160.9

81 / 178.6

90 / 198.4

Electrical requirements (230V) 60Hz, 4A 50Hz, 4A 60Hz, 5.5A 50Hz, 5.5A 60Hz, 4A 50Hz, 4A 60Hz, 5.5A 50Hz, 5.5A
Cat. No.

AAH

23411K

AAH

23422K

AAH2

3511K

AAH

23522K

AAH

23611K

AAH

23622K

AAH

23711K

AAH2

3722K

Electrical requirements (120V) 60Hz, 7.5A 60Hz, 10.1A 60Hz, 7.5A 60Hz, 10.1A
Cat. No. AAH23465U AAH23565U AAH23665U AAH23765U

※ Above specifications can be changed without prior notice.

for Incubated Shakers

  • Flask clamps

  • Plastic clamps (plastic)

  • Funnel clamps

  • Dedicated platforms

Universal platforms / Flask clamps / Funnel clamps

Universal platforms provide flexibility for mixing assortments of test tubes and glassware of varying sizes on a single platform. Various clamps for Erlenmeyer flasks and separatory funnels are available.

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Cat. No. Universal platform AAA23501-V3 AAA23502-V3 AAA23503-V3 AAA23501-V3 AAA23502-V3
- Flask clamps
(Stainless steel)
Erlenmeyer flask size Max. mountable flask clamps
AAA23550 for 50 mL 36 49 88 36 49
AAA23551 for 100 mL 24 39 68 24 39
AAA23552 for 250 mL 14 20 39 14 24
AAA23556 for 300 mL 14 20 39 14 24
AAA23553 for 500 mL 9 16 28 9 16
AAA23554 for 1L 6 9 18 6 9
AAA23555 for 2L 4 5 11 4 6
AAA23557 for 2.8L 2 4 8 2 5
AAA23558 for 4L - - 6 - 4
AAA23559 for 6L - - 5 - 2
- Flask clamps
(plastic)
Erlenmeyer flask size Max. mountable flask clamps
AAA30570 for 50 mL 36 49 88 36 49
AAA30571 for 100 ~ 125 mL 19 29 48 19 29
AAA30572 for 200 mL 13 21 35 13 21
AAA30573 for 250 mL 13 19 35 13 19
AAA30574 for 300 mL 12 19 35 12 19
AAA30575 for 500 mL 9 12 24 9 12
AAA30576 for 1L 4 9 12 5 9
AAA30577 for 2L 2 4 8 4 5
- Funnel clamps separatory funnel size Max. mountable funnel clamps
AAA23562 for 250 mL 4 6 15 4 6
AAA23563 for 500 mL 2 4 10 3 4
AAA23564 for 1L - 3 7 - 3
AAA23565 for 2L - - 5 - -

※ Above accessories need to be mounted on a universal platform which is sold separately.

Dedicated platforms

When using a single flask size only, the dedicated platforms with pre-installed clamps provide maximum capacity. 250mL and 500mL clamps arestandard but other sizes can be available.

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Universal platform &250mL flask clamps AAA23611-V1 AAA23623-V1 AAA23634 AAA23611-V1 AAA23621-V1
No. of flask clamps 14 20 39 14 20
Universal platform &500mL flask clamps AAA23612-V1 AAA23622-V1 AAA23635 AAA23612-V1 AAA23622-V1
No. of flask clamps 9 16 28 9 16

* A dedicated platform is sold with setting each max. mountable amount of flask clamps on.



  • Test tube racks

  • Microplate holders

  • Rubber mats

Test tube racks

Easy to release and mount racks made of durable stainless steel with adjustable angle and tube height support. Test tube racks are used with an optional universal platform.

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Cat.No. Universal platform AAA23501-V3 AAA23502-V3 AAA23053-V3 AAA31501-V3 AAA23502-V3
- Test tube size Mountable capacity of rack*
AAA23581 for 86 test tubes, Ø8mm / Ø0.3˝ 2 4 7 2 4
AAA23582 for 86 test tubes, Ø10mm / Ø0.4˝
AAA23583 for 58 test tubes, Ø12mm / Ø0.5˝
AAA23584 for 58 test tubes, Ø14mm / Ø0.6˝
AAA23585 for 32 test tubes, Ø17mm / Ø0.7
AAA23586 for 19 test tubes, Ø25mm / Ø1.0˝
AAA23587 for 10 test tubes, Ø30mm / Ø1.2˝
AAA23594 for 10 test tubes, Ø35mm / Ø1.4˝
AAA23593 for 4 test tubes, Ø50mm / Ø1.9˝

* No declination
※ We can manufacture other size of test tube racks to meet your specific requirements. Contact us for details.

Microplate holders

Available in three styles: tower type, flat type (small and large), and single type. Tower type holder is for 10 standard or deep well plates. Large flat holder is for 4 standard or deep well plates. Small flat holder is for 3 standard or deep well plates. Single type holder is for 1 standard or deep well plate. (standard well plates’ height: 14.7mm)

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Cat.No. Universal platform AAA23501-V3 AAA23502-V3 AAA23053-V3 AAA31501-V3 AAA23502-V3
- Microplate holder type Max. mountable microplate holders
AAA23654 Single 8 15 25 8 15
AAA23651 Tower 5 8 21 6 10
AAA23652 Flat A(large) - 2 4 - 2
AAA23653 Flat B(small) 2 2 6 2 3

* Microplate holders need to be mounted on an universal platform which is sold separately.

Rubber mats

Designed for low-speed applications, non-skid rubber mats allow quick addition or removal of flasks, plates or tubes.

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Cat. No AAA23531 AAA23532 AAA23534 AAA31531 AAA31532


  • Spring wire racks
    (two tier rack with flexible crossed spring)

  • Universal attachments

  • Lab sticker

  • Retractable foot caster

Spring wire racks

Ideal for holding a wide variety of tubes, flasks, and other glassware. All components are made of stainless steel.

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Cat. No. AAA23521-V1 AAA23522-V2 AAA23514 AAA31521-V1 AAA31522-V1
- Erlenmeyer flask size Max. inserting flasks
for 50 mL 16 25 45 16 25
for 100 mL 9 16 28 9 16
for 250 mL 4 9 18 4 9
for 300 mL 4 9 18 4 9
for 500 mL 4 5 15 4 5
for 1L 2 4 10 2 4
for 2L 1 2 6 1 2
for 2.8L 1 2 4 1 2

Universal attachments (utility carriers)

Several adjustable clamping bars for quickly securing a variety of glassware or tubes on non-skid rubber mats. Suitable for flat-bottomed flasks of various sizes.

Description IST-3075/R IST-4075/R ISF-7100/R
ISF-7200/R
ISS-3075/R ISS-4075/R
Cat. No. AAA23511-V1 AAA23512-V1 AAA23505 AAA23511-V1 AAA23512-V1

Lab sticker

An alternative method for securing vessels to a shaker platform. Ideal for containers such as bottles and dishes that cannot be held on the universal platform with conventional flask clamps. For safe operation, gradual RPM increase is recommended.

Cat. No. Description (W×D×H) (mm / inch)
AAA30551 200×200×5 / 7.9×7.9×0.2

tmp_option6-1.jpg

Gateway

Establish Jeio Tech Network by Gateway. No computer use is required at all. Remote monitoring of operating status through a mobile phone is simply available when you place a Gateway in your laboratory. Maximum 4 units can be connected to Gateway by RS-232 cable.

Cat. No. Description
AAAQ1011 Gateway (2.4GHz, 100~240V, 50/60Hz)

 


Related Products

Inquiry Form

  • Title (*)

    Position

  • First name (*)

    Last name (*)

  • Company (*)

  • Business type (*)

    Business division

  • Country

    City

  • E-Mail (*)

    Phone

  • Request Product (Model)

  • Your message