JeioTech manufacturer of Lab Companion

Incubators

Incubators

Low Temperature Incubator (Multi type, Forced Convention)

Two or four incubation chambers in a single unit.

Designed to offer an ideal and cost-effective solution for laboratories with limited space and budget.

Model Name : IL-11-2C/4C

Efficient lab space use with multi-chamber incubator

Designed to offer an ideal and cost-effective solution for laboratories with limited space and budget.
- Two or four 150L chambers merged into a single unit.
Optimum model selection between two and four chamber unit according to application demand.
Suitable for conducting each different experiment at once.
- Independent temperature and timer control of each chamber using microprocessor PID.

Performance

Temperature range from 0℃to 60℃.
- Silent cooling system reduces water evaporation within the chamber.
Microprocessor PID control.
Temperature calibration.
Automatic tuning.
Adjustable 3-step fan speed with defrosting time and period control.

Convenience

Intuitive control panel with bright LED display. (0.1℃resolution)
Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
Convenient preset function for 3 most commonly used temperature settings.
Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each profile.
Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
Rounded inner chamber corners for easy cleaning and optimal airflow.
Built-in casters for easy transport and installation.

Safety

Low-Temp.-Incubator-(2-chamber)_2.jpg

Model		IL-11-2C	IL-11-4C
Chamber volume (L / cu ft)		150 / 5.3 x 2 chambers	150 / 5.3 x 4 chambers
Refrigerator (Hp)		1/8 HBP x 2EA	1/8 HBP x 4EA
Temperature	Range (℃ / ℉)	0 to 60℃ / +32 to 140℉
	1)Fluctuation at 25℃ (±℃ / ℉)	0.1 / 0.18
	1)Variation at 25℃ (±℃ / ℉)	0.5 / 0.9
Dimension(W×D×H)	Interior (mm / inch)	600x500x500 / 23.6x19.7x19.7 x 2 chambers	600x500x500 / 23.6x19.7x19.7 x 4 chambers
	Exterior (mm / inch)	760x760x1690/ 29.9x29.9x66.1	1500x760x1690/ 59.1x29.9x66.1
	No. of wire shelf (standard / max.)	2 / 11 per chamber	2 / 11 per chamber
	Net weight (Kg / lbs)	180 / 397	350 / 772
Electrical requirements (230V, 60Hz)		9A	9A x 2EA
Cat. No.		AAH28111K	AAH28011K
Electrical requirements (230V, 50Hz)		9A	9A x 2EA
Cat. No.		AAH28112K	AAH28012K
Electrical requirements (120V, 60Hz)		16.5A	16.5A x 2EA
Cat. No.		AAH28113U	AAH28013U

1) Technical data according to DIN 12880.
※ Temperature change may occur during automatic defrost.

Wire shelves

Stainless steel and electro-polished shelves are readily removed without using tools for easy cleaning.

Perforated shelves

Stainless steel shelves are readily removed without using tools for easy cleaning.