JeioTech manufacturer of Lab Companion

PRODUCTS

Baths & Circulators

HOME
> PRODUCTS
> Baths & Circulators

Baths & Circulators

Heating Baths (Economy)

Economical water baths for optimal temperature control.

Photo: with optional transparent PP gable cover & Test tube rack

Model Name : BW-05B/10B/20B

BROCHURE URL COPY Inquiry Form

Performance

Temperature range from ambient +7℃ to 100℃.
On/off temperature control.

Convenience

Simple and quick control panel.
Corrosion-resistant stainless steel construction allowing other bath fluids as well as water and silicone fluids.
Low-profile design with sloped control panel for easier access and better safety.
Variety of accessories are available to meet application demands.

Safety

Isolated design of heater, and sensor by a baffle plate to protect users and samples against direct contact.
Complete safety protection system with warning alarms.
- Low fluid level and dry-running, over-temperature, over-current.
Splash-proof keypad.

Model		BW-05B	BW-10B	BW-20B
Bath Volume (L / cu ft)		3.5 / 0.1	11.5 / 0.4	20 / 0.7
Temperature	Working Temperature Range (℃ / oF)	Amb. +7 to 100 / Amb. +12.6 to 212
	Temperature Stability at 50℃ (±℃ / oF)	0.4 / 0.72	0.5 / 0.9	0.5 / 0.9
	Heat up time to 70℃ (min) (℃ / oF)	25	51	68
Dimension	Bath Opening / Depth (W×L, D) (mm / inch)	240×136, 110 / 9.4×5.4, 4.5	300×240, 165 / 11.8×9.5, 6.5	498×300, 165 / 19.6×11.8, 6.5
	Overall (W×L×H) (mm / inch)	303×242×245 / 11.9×9.5×9.6	357×330×290 / 14.1×13×11.4	564×392×290 / 22.2×15.4×11.6
	Net Weight (kg / lbs)	6.5 / 14.3	10 / 22	18.5 / 40.8
Electrical Requirements (230V)		50/60Hz, 3A	50/60Hz, 4.3A	50/60Hz, 8.7A
Cat. No.		AAH46012K	AAH46022K	AAH46032K
Electrical Requirements (120V)		60Hz, 5.8A	60Hz, 8.3A	60Hz, 8.3A
Cat. No.		AAH46013U	AAH46023U	AAH46033U

※ The lowest temperature that can be controlled depends on changes in room temperature and sample temperature. Therefore, please contact the distributor of our products before purchasing for technical consultation.

※ Technical data (according to DIN 12876).

※ Bath fluid : Water.

Transparent Polypropylene Gable Covers

prevent liquid loss due to evaporation, and also protect samples from contamination due to direct dripping of the bath liquid into the samples. The gable type roof accommodates glassware of varying heights.

Cat. No.	Description	Suitable for
AAA45531	Transparent Polypropylene Gable Type	BW-05H / BW-05B
AAA45532	Transparent Polypropylene Gable Type	BW-10H / BW-10B
AAA45533	Transparent Polypropylene Gable Type	BW-20H / BW-20B

Stainless Steel Flat Covers

Made of stainless steel to prevent corrosion and rust. (only for BW-H and BW-B Models)

Cat. No.	Description	Suitable for
AAA45541	Stainless steel flat type	BW-05H / BW-05B
AAA45542	Stainless steel flat type	BW-10H / BW-05B
AAA45543	Stainless steel flat type	BW-20H / BW-05B

Open-rings Covers

Beakers or Erlenmeyer flasks can be placed directly onto the perforated stainless steel half-shelf adjuster or water tank bottom. By adjusting ring size for each glassware, liquid loss due to evaporation is minimized. (only for BW-H, BW-B, BW-G Models)

Cat. No.	Description		Suitable for
AAA45521	with 2 openings	80mm dia. (3.1˝)	BW-05H / BW-05B
AAA45524	with 1 opening	110mm dia. (4.3˝)	BW-05H / BW-05B
AAA45522	with 4 openings	80mm dia. (3.1˝)	BW-10H / BW-10B
AAA45525	with 2 openings	110mm dia. (4.3˝)
AAA45526	with 1 opening	185mm dia. (7.3˝)
AAA45523	with 8 openings	80mm dia. (3.1˝)	BW-20H / BW-20B
AAA45527	with 6 openings	110mm dia. (4.3˝)
AAA45528	with 2 openings	185mm dia. (7.3˝)

Test Tube Racks

Highly durable stainless steel test tube racks feature adjustable angle and tube height support without requiring any base plate. You can easily mount and release test tube racks.

Cat. No.	Description		Insert Capacity of Racks*
AAA44581	for 86 test tubes	Ø8mm / Ø0.3˝	CW-20G/P, 30G/P RW3-2025/P, 2040/P RW-33025/P, 3040/P
AAA44582	for 86 test tubes	Ø10mm / Ø0.4˝
AAA44583	for 58 test tubes	Ø12mm / Ø0.5˝
AAA44585	for 32 test tubes	Ø16mm / Ø0.6˝
AAA44586	for 19 test tubes	Ø25mm / Ø1.0˝	2ea	3ea
AAA41531	for 50 test tubes	Ø8mm / Ø0.3˝	BW-05H BW-05B	RW3-1025/P RW3-1040/P CW3-10/P
AAA41532	for 50 test tubes	Ø10mm / Ø0.4˝
AAA41533	for 33 test tubes	Ø12mm / Ø0.5˝
AAA41535	for 16 test tubes	Ø16mm / Ø0.6˝
AAA41539	for 10 test tubes	Ø25mm / Ø1.0˝	1ea
AAA45551	for 176 test tubes	Ø8mm / Ø0.3˝	BW-10H BW-10B	BW-20H BW-20B
AAA45552	for 176 test tubes	Ø10mm / Ø0.4˝
AAA45554	for 84 test tubes	Ø12mm / Ø0.5˝
AAA45556	for 68 test tubes	Ø16mm / Ø0.6˝
AAA45561	for 33 test tubes	Ø25mm / Ø1.0˝	1ea	2ea

* No declination.

Spring Wire Racks

Ideal for holding a wide variety of tubes, flasks, and other glassware. All components are made of stainless steel. (for all models)

Half-shelf Adjusters

Stainless steel perforated sample tray shelves with adjustable height support prevent leaks and guard against rust and contamination. (only for BW-H, BW-B, and BW-G Models)

Spring Wire Racks

Cat. No.	Suitable for
AAA45502	BW-10H / BW-10B
AAA45503	BW-20H / BW-20B

Half-shelf Adjusters

Cat. No.	Suitable for
AAA45511	BW-05H / BW-05B
AAA45512	BW-10H / BW-10B
AAA45531	BW-20H / BW-20B