JeioTech manufacturer of Lab Companion

PRODUCTS

Industrial Test Equipment

HOME
> PRODUCTS
> Industrial Test Equipment

Industrial Test Equipment

Heating & Cooling Chambers (KBD)

KBD-012/025/040

Model Name : KBD-012/025/040

BROCHURE URL COPY Inquiry Form

* K - SERIES

Perforated shelves for heavy load (optional)

Stainless steel chamber

Two-point door latch

Individual over temperature limiter

Warning signal lamp(optional)

Color LCD controller

Automatic start

Program control

End of program

Function setup

Operating status

Program setup

Graph display

Performance

Suitable for specific use such as heat treatment and drying process.
Microprocessor PID control / Temperature calibration / Automatic tuning.
Air-tight door closure with double sealed packing.
- Heat-resistant silicone double packing completely blocks high heat leakage from the inner chamber.
- Two-point door latch also enhances tightness to door closure.
Energy efficiency is achieved thanks to optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 51℃. (DIN EN 563)
Reliable design and production of door is guaranteed.
- Evaluates the results after opening the door by 90 degrees and applying 50kg load to the point of 30cm from hinges.

Safety

User selectable operation mode after power interruption
- ether Automatic run or Manual run.
Over-temperature protection.
Over-current and current leakage protection.
(ELCB, earth leakage circuit breaker)
Independent safety circuit breaker.
- Important parts such as controller and heaters are highly secured from short circuit. Especially each heater has an individual circuit breaker to completely break a short circuit.
Reversed-phase protection.
- Electrical connection error indicator helps user to rapidly fix the connection.
Over-current protection of motor. - Automatic shut-off in situations where there is over-current to the motor.
Open door warning.
- Heater and fan stop when the door is the open state.
Electric wiring panel access warning.
- Automatic stop if the cover of electric wiring panel is opened.
Built in door lock with a key

Convenience

Corrosion resistance stainless steel inner chamber.
Space efficient and easy loading chamber design.
- Included two shelves for loading of large amounts of samples.
- Heavy load shelving, rated for 40kg are also available. (optional)
User friendly LCD controller.
- Colorful interactive touch type LCD controller.
- Set point temperature and present temperature are clearly shown together on display.
- Sufficient programmable control support.
- Operating progress can be shown in graph mode for better data understanding.
- Automatic start/stop can be programmed for unattended operations.
- Display indicates abnormal temperature changes or power failures.
- Selective bilingual language support.
(Korean / English or English / Chinese, selectable only when placing an order)
- Temperature and other operating parameters can be recorded using a six channel digital recorder. (optional)
Computer interface.
- RS-485 communication port(optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
- Program patterns are simple to set with the use of our software.
- Easy to check status of real-time operations. Graph data supports easy understanding.
- Storage and documentation of programs.
- Data with saving capabilities in excel and text format.
- Storage of program information, backup of value settings, recovery, and temperature values.
- RS-232 communication port as standard offer

Description	No
Programmable pattern capacity	100
Pattern repeat time	999
Part repeat time	255
Max. segments per a pattern	100
Available max. segments*	2000
Programmable process time per a segment	0 to 99 hr. 59 min.

* Even though the max. segments per pattern are 100, the total available segments are up to 6000 not 10000, therefore arrangement of the number of segment and patterns will need to be done properly.

Model	KBD-012	KBD-025	KBD-040	KBD-070	KBD-100
Temperature data
Range (℃ / ℉)	-70 to 180 / -94 to 356	-70 to 180 / -94 to 356	-70 to 180 / -94 to 356	-70 to 180 / -94 to 356	-70 to 180 / -94 to 356
Fluctuation (±℃ / ±℉) ^1),²⁾
at -70℃	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at -50℃	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at -25℃	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at -10℃	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at 25℃	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at 70℃	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at 100℃	0.2 / 0.36	0.2 / 0.36	0.3 / 0.54	0.2 / 0.36	0.2 / 0.36
at 150℃	0.2 / 0.36	0.3 / 0.54	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
at 180℃	0.3 / 0.54	0.3 / 0.54	0.2 / 0.36	0.2 / 0.36	0.2 / 0.36
Gradient (±℃ / ±℉) ¹⁾
at -70℃	0.3 / 0.54	0.3 / 0.54	0.3 / 0.54	0.2 / 0.36	0.2 / 0.36
at -50℃	0.4 / 0.72	0.5 / 0.9	0.4 / 0.72	0.3 / 0.54	0.3 / 0.54
at -25℃	0.4 / 0.72	0.4 / 0.72	0.4 / 0.72	0.3 / 0.54	0.3 / 0.54
at -10℃	0.5 / 0.9	0.4 / 0.72	0.5 / 0.9	0.4 / 0.72	0.4 / 0.72
at 25℃	0.5 / 0.9	0.4 / 0.72	0.4 / 0.72	0.4 / 0.72	0.4 / 0.72
at 70℃	0.6 / 1.08	0.7 / 1.26	0.6 / 1.08	0.7 / 1.26	0.7 / 1.26
at 100℃	1 / 1.8	1 / 1.8	1 / 1.8	0.9 / 1.62	0.9 / 1.62
at 150℃	1 / 1.8	1.1 / 1.98	1 / 1.8	0.8 / 1.44	0.8 / 1.44
at 180℃	1.2 / 2.16	1.2 / 2.16	1.1 / 1.98	1 / 1.8	1 / 1.8
Heating time (min) ²⁾
from -70℃ to 25℃	26	28	30	30	31
from -50℃ to 25℃	23	23	24	25	27
from -25℃ to 25℃	15	15	16	17	18
from -10℃ to 25℃	11	10	11	13	13
from 25℃ to 70℃	13	13	14	14	16
from 25℃ to 100℃	26	25	25	26	27
from 25℃ to 150℃	41	40	38	42	44
from 25℃ to 180℃	54	53	55	56	58
from -50℃ to 180℃	69	68	68	72	75
from -50℃ to 120℃	55	56	56	61	62
from -25℃ to 120℃	47	48	48	53	55
from -50℃ to 5℃	18	17	18	21	21
from -70℃ to 5℃	25	25	25	28	28
from 5℃ to 125℃	43	42	45	47	48
from 125℃ to 180℃	18	17	18	22	23
Cooling time (min) ²⁾
from 25℃ to -70℃	75	75	77	74	73
from 25℃ to -40℃	33	33	32	30	32
from 25℃ to -25℃	22	22	20	20	21
from 25℃ to -10℃	17	17	14	13	15
from 70℃ to 25℃	23	20	23	20	22
from 100℃ to 25℃	34	35	35	32	31
from 120℃ to -50℃	83	80	81	80	80
from 5℃ to -40℃	23	23	23	23	23
from 5℃ to -70℃	67	72	72	70	70
Recovery time after door was opened for 30sec. (min) ²⁾
at -70℃	12	12	13	9	10
at -50℃	8	8	8	6	6
at -25℃	6	6	6	5	5
at -10℃	5	5	6	5	5
at 70℃	6	6	6	6	6
at 100℃	5	5	5	6	6
at 150℃	7	7	10	10	10
at 180℃	7	8	10	10	10
Electrical requirement (380V, 50/60Hz, 3Ph)	10	12	18	29	29
Cat. No.	AAHKC1110K	AAHKC2110K	AAHKC3110K	AAHKC4110K	AAHKC5110K

1) According to IEC 60068-3-5
2) According to DIN 12880
※ Above specification value is recorded by 380V/50Hz.
※ Above specifications can be changed without prior notice.

Digital recorder
Perforated shelf
Warning signal lamp

for Floor Standing Chambers

Cat. No.	Description	Models
Cat. No.	Description	KBD
AAA8T505	Recorder (digital, 6 channels)
AAA8T540	Interface converter (RS - 485 → 232) included a cable (5m / 16.4ft)
AAA80550	Warning signal lamp
00LTV0000070	Wire shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-012 (462x470mm / 18.2x18.5”)
00LTV0000053	Wire shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-025 (562x620mm / 22.1x22.4”)
00LTV0000029	Wire shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-040 (712x670mm / (28.0x26.4”)
00LTV0000030	Wire shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-070 (862x770mm / 33.9x30.3”)
00LTV0000057	Wire shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-100 (962x880 / 37.9x34.6”)
AAAK1501	Perforated shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-012 (462x470mm / 18.2x18.5”) (max. load 40kg)
AAAK1502	Perforated shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-025(562x620mm / 22.1x22.4”) (max. load 40kg)
AAAK1503	Perforated shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-040 (712x670mm / (28.0x26.4”) (max. load 40kg)
AAAK1504	Perforated shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-070 (862x770mm / 33.9x30.3”) (max. load 40kg)
AAAK1505	Perforated shelf for LBV/LTV/KBD/KMV/JMV/PBV/PMV-100 (962x880 / 37.9x34.6”) (max. load 40kg)