JeioTech manufacturer of Lab Companion

Autoclaves

Autoclaves

Autoclaves (Vertical Type)

Microprocessor control with reliable safety functions guarantees optimum sterilization temperature.

Model Name : ST-50G/65G/85G/105G

Performance

Microprocessor controller and temperature calibration function allows for high precision temperature control.
- Sterilization temperature at 110 to 123°C
- Melting* temperature at 60 to 100°C
* Liquefaction of coagulated agar media.
Automatic sterilization system for unattended operation.
- Heating > Check safe > Sterilization > Sterilization safe > Exhausting > End
Convenient operation modes for various uses.
- Standard modes and program modes are listed in detail as below tables.
Temperature calibration function.

Convenience

Conveniently monitored by an independent control display, sterilization process display, and pressure gauge.
- VFD for visualization of temp, pressure(optional), timer, warning alert checks.
- LED lamps for sterilization process check.
- Easy pressure check with the standard gauge attached to the front.
Vertical type autoclaves which allow for top loading are suitable for high volume sterilization.
- Baskets are stackable two high or even more levels, which secure inside the chamber space requirements.
Low-maintenance
- The chamber is constructed of stainless steel which is superiorly resistant to corrosion.
- Easy to replace silicone gasket.
Convenient documentation with the optional data recorder.
- Dot type recorder(6 point) allows for precise documentation.

Safety

Mechanical safety devices
- Over current protection.
- Over temperature protection by automatic power cutoff.
- Over pressure protection by automatic and manual safety valve.
Safety warning systems
- Over temperature warning.
- Low temperature warning.
- Low water level warning.
- Low heat warning if the temperature does not reach the sterilization or melting temperature.
- Sterilization fail warning if the operation is unexpectedly stopped during sterilization process.
Slide opening door with plastic cover of low thermal conductivity prevents burns from the contact.

Model		ST-50G	ST-65G	ST-85G	ST-105G
Control		Microprocessor PID control
Chamber volume (L / cu ft)		50 / 1.76	65 / 2.29	85 / 3.0	105 / 3.7
Temperature	Sterilization temp. (℃ / ℉)	110 to 123 / 230 to 253.4
Temperature	Melting temp. (℃ / ℉)	60 to 100 / 140 to 212
Pressure	Sterilization at 121℃ (kg/cm2)	1.1 to 1.2
	Gauge range in analog (Mpa)	- 0.1 to 0.6
	Permissible altitude (m)	Up to 800
Safety		Over temperature protector / Pressure safety valve / Over current protector
Safety		Warning alert (over temp. / low temp. / low heat / sterilization fail / low water level)
Timer		0 to 999 min.
Dimension	Interior (WxH) (mm / inch)	400x458 / 15.75x18.03	400x558 / 15.75x21.97	400x758 / 15.75x29.84	400x908 / 15.75x35.75
	Exterior (W×D×H) (mm / inch)	624x672x870 / 24.57x26.46x34.25	624x672x971 / 24.57x26.46x38.23	624x672x1083 / 24.57x26.46x42.64	624x672x1233 / 24.57x26.46x48.54
	Exterior with exhaust tank (W×D×H) (mm / inch)	722x672x870 / 28.42x26.46x34.25	722x672x971 / 28.42x26.46x38.23	722x672x1083 / 28.42x26.46x42.64	722x672x1233 / 28.42x26.46x48.54
	Door max. opening (W×D×H) (mm / inch)	1012x672x882 / 39.84x26.46x34.72	1012x672x983 / 39.84x26.46x38.7	1012x672x1095 / 39.84x26.46x43.11	1012x672x1245 / 39.84x26.46x49.01
	Basket (ØxH) (mm / inch)	380x180 / 14.96x7.09	380x230 / 14.96x9.05	380x330 / 14.96x12.99	380x405 / 14.96x15.94
	Net weight (Kg / lbs)	94.5 / 208.34	99.5 / 219.36	104 / 229.28	110 / 242.51
Electrical requirements (230V, 50/60 Hz)		14.3A	14.3A	14.3A	21.3A
Cat. No.		AAHL1015K	AAHL1025K	AAHL1035K	AAHL1045K

※ This product is not available for usage at an altitude higher than 800m.

Optional Accessories

Cat. No.	Description
AAAL1501	Recorder Set	Recorder (Dot, 6 points) & temp. sensor (Double)
AAAL1502	Recorder Set	Recorder (Thermal Line) & temp. sensor (Double)
AAAL1511	Pressure Sensor	0~3.5 bar
AAAL1521	Exhaust Tank	5L, 114x387x281mm
00ATC0000108	temperature sensor for Recorder

※ The above option is only instolled when initial other.

Included and Maximum Basket Quantity

Baskets are stackable two high or even more levels, which secure inside the chamber space requirements as listed below.

Cat. No.	Description	ST-50G (458mm)		ST-65G (558mm)		ST-85G (758mm)		ST-105G (908mm)
Cat. No.	Description	Included	Maximum	Included	Maximum	Included	Maximum	Included	Maximum
00ATC0000002	Basket (Stainless steel, Ø380x180mm)	2	2	-	2	-	3	-	4
00ATC0000003	Basket (Stainless steel, Ø380x230mm)	-	1	2	2	-	2	-	3
00ATC0000004	Basket (Stainless steel, Ø380x330mm)	-	1	-	1	2	2	-	2
00ATC0000126	Basket (Stainless steel, Ø380x405mm)	-	-	-	1	-	1	2	2

* Above specifications can be changed without prior notice.

Flask Loading Capacity

At Max. loading capacity, partially without baskets.

Description	Capacity	ST-50G (ea x floor)	ST-65G (ea x floor)	ST-85G (ea x floor)	ST-105G (ea x floor)
Erlenmeyer Flasks (O.D.xH, mm)	250 mL (82 x 132)	14x3	14x4	14x5	14x6
	500 mL (101 x 176)	8x2	8x3	8x4	8x4
	1000 mL (129 x 216)	5x2	5x2	5x3	5x3
	2000 mL (160 x 268)	3x1	3x2	3x2	3x3
Media Bottles (O.D.xH, mm)	250 mL (70 x 143)	20x3	20x3	20x5	20x6
	500 mL (86 x 181)	14x2	14x3	14x4	14x4
	1000 mL (101 x 230)	8x1	8x2	8x3	8x3
	2000 mL (136 x 265)	5x1	5x1	5x2	5x3

Introduction

Maintenance