产品
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
Fume Hoods
- HOME
- > 产品
- > Fume Hoods
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
-
Quick tilt-adjustable knob
-
360° rotatable joint
-
Damper for airflow rate adjustment
Step 1. Extraction Arm
Type | Description | |
---|---|---|
Material | Polypropylene | Excellent chemical resistance |
Anodized Aluminum 1) | Lightweight, General use | |
Diameter | 50 mm | For fine work |
75mm 2) | Lightweight, General use | |
Joint | 3 Joint | Radius 1480 ~ 1780 mm / 58.3 ~ 70.1 inch |
1) Weak against scratching due to the nature of the material.
2) 75mm radius used in the case of mist.
Specification
Model | Extraction Arm, Length (mm / inch) | Weight (kg / lbs) |
Cat. No. | ||||||
---|---|---|---|---|---|---|---|---|---|
A | B | C | D | Total | |||||
75mm / 3.0 inch diameter,Polypropylene | 3 Joints | AH-3160 | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.4 / 5.3 | AAAB6541 |
75mm / 3.0 inch diameter,Polypropylene, Ceiling mount type | 3 Joints | AH-3160C | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.4 / 5.3 | AAAB6542 |
75mm / 3.0 inch diameter,Anodized Aluminum | 3 Joints | AH-3160A | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.6 / 5.7 | AAAB6533 |
75mm / 3.0 inch diameter,Anodized Aluminum Ceiling mount type | 3 Joints | AH75-3160AC | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.6 / 5.7 | AAAAB6537 |
50mm / 2.0 inch diameter,Polypropylene | 3 Joints | AH5-3160 | 250 / 9.8 | 9.8 640 / 25.2 | 540 / 21.3 | 250 / 9.8 | 1680 / 66.1 | 1.4 / 3.1 | AAAB6563 |
50mm / 2.0 inch diameter,Polypropylene,Ceiling mount type | 3 Joints | AH5-3160C | 250 / 9.8 | 640 / 25.2 | 540 / 21.3 | 250 / 9.8 | 1680 / 66.1 | 1.4 / 3.1 | AAAB6566 |
Step 2. Bracket & Column
- Column of suitable height is selected based on the ceiling height.
- Excellent durability due to powder coating.
Specification
Model | Dimension (W x D x H, mm / inch) | Suitable for (mm/inch) | Cat. No. |
---|---|---|---|
Ceiling Bracket | 260 x 260 x 2 / 10.2 x 10.2 x 0.08 | 75 / 3.0 | AAAB6508 |
Ceiling Column | 100 x 100 x 250 / 3.9 x 3.9 x 9.8 | 75 / 3.0, 50 / 2.0 | AAAB6512 |
100 x 100 x 500 / 3.9 x 3.9 x 19.7 | AAAB6513 | ||
100 x 100 x 750 / 3.9 x 3.9 x 29.5 | AAAB6514 | ||
100 x 100 x 1000 / 3.9 x 3.9 x 39.4 | AAAB6515 | ||
100 x 100 x 1250 / 3.9 x 3.9 x 49.2 | AAAB6516 | ||
100 x 100 x 1500 / 3.9 x 3.9 x 59.1 | AAAB6517 | ||
Wall Bracket | 158 x 259 x 82 / 6.2 x 10.2 x 3.2 | 75 / 3.0 | AAAB6510 |
Step 3. Hood
Type | Material | Description | |
---|---|---|---|
Basic type | Polypropylene |
|
|
Dome type (Clear) | Styrene butadiene copolymer |
|
|
Dome type (White) | Polypropylene | ||
Square type (Clear) | Styrene butadiene copolymer |
|
|
Square type (White) | Polypropylene | ||
Hood type (White) | Polyethylene |
|
-
Dome type
-
Square type
-
Hood type
Specification
Diameter | Type | Dimension | Color | Material | Cat. No. |
---|---|---|---|---|---|
Φ75 mm/ 3.0 inch | Basic (Ø, mm / inch) | 171 / 6.7 | White | Polypropylene | Standard |
Dome (Ø x H, mm / inch) | 400 x 140 / 15.7 x 5.5 | White | Polypropylene | AAAB6221 | |
Clear | Styrene butadiene copolymer | AAAB6211 | |||
Square (W x D x H, mm / inch) | 494 x 390 x 245 / 19.4 x 15.4 x 9.6 | White | Polypropylene | AAAB6241 | |
Clear | Styrene butadiene copolymer | AAAB6231 | |||
Φ50 mm / 2.0 inch | Dome (Ø x H, mm / inch) | 294 x 180 / 11.6 x 7.1 | White | Polypropylene | Clear Dome (Standard) (Optional White Dome) |
Clear | Styrene butadiene copolymer |
※ Ø75 Basic hood is provided as an integral part of the extraction arm and is used for suction of small volumes of material in confined spaces.
※ Ø50 Dome hood is provided as standard on the extraction arm.
-
Quick tilt-adjustable knob
-
360° rotatable joint
-
Damper for airflow rate adjustment
Step 1. Extraction Arm
Type | Description | |
---|---|---|
Material | Polypropylene | Excellent chemical resistance |
Anodized Aluminum 1) | Lightweight, General use | |
Diameter | 50 mm | For fine work |
75mm 2) | Lightweight, General use | |
Joint | 3 Joint | Radius 1480 ~ 1780 mm / 58.3 ~ 70.1 inch |
1) Weak against scratching due to the nature of the material.
2) 75mm radius used in the case of mist.
Specification
Model | Extraction Arm, Length (mm / inch) | Weight (kg / lbs) |
Cat. No. | ||||||
---|---|---|---|---|---|---|---|---|---|
A | B | C | D | Total | |||||
75mm / 3.0 inch diameter,Polypropylene | 3 Joints | AH-3160 | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.4 / 5.3 | AAAB6541 |
75mm / 3.0 inch diameter,Polypropylene, Ceiling mount type | 3 Joints | AH-3160C | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.4 / 5.3 | AAAB6542 |
75mm / 3.0 inch diameter,Anodized Aluminum | 3 Joints | AH-3160A | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.6 / 5.7 | AAAB6533 |
75mm / 3.0 inch diameter,Anodized Aluminum Ceiling mount type | 3 Joints | AH75-3160AC | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.6 / 5.7 | AAAAB6537 |
50mm / 2.0 inch diameter,Polypropylene | 3 Joints | AH5-3160 | 250 / 9.8 | 9.8 640 / 25.2 | 540 / 21.3 | 250 / 9.8 | 1680 / 66.1 | 1.4 / 3.1 | AAAB6563 |
50mm / 2.0 inch diameter,Polypropylene,Ceiling mount type | 3 Joints | AH5-3160C | 250 / 9.8 | 640 / 25.2 | 540 / 21.3 | 250 / 9.8 | 1680 / 66.1 | 1.4 / 3.1 | AAAB6566 |
Step 2. Bracket & Column
- Column of suitable height is selected based on the ceiling height.
- Excellent durability due to powder coating.
Specification
Model | Dimension (W x D x H, mm / inch) | Suitable for (mm/inch) | Cat. No. |
---|---|---|---|
Ceiling Bracket | 260 x 260 x 2 / 10.2 x 10.2 x 0.08 | 75 / 3.0 | AAAB6508 |
Ceiling Column | 100 x 100 x 250 / 3.9 x 3.9 x 9.8 | 75 / 3.0, 50 / 2.0 | AAAB6512 |
100 x 100 x 500 / 3.9 x 3.9 x 19.7 | AAAB6513 | ||
100 x 100 x 750 / 3.9 x 3.9 x 29.5 | AAAB6514 | ||
100 x 100 x 1000 / 3.9 x 3.9 x 39.4 | AAAB6515 | ||
100 x 100 x 1250 / 3.9 x 3.9 x 49.2 | AAAB6516 | ||
100 x 100 x 1500 / 3.9 x 3.9 x 59.1 | AAAB6517 | ||
Wall Bracket | 158 x 259 x 82 / 6.2 x 10.2 x 3.2 | 75 / 3.0 | AAAB6510 |
Step 3. Hood
Type | Material | Description | |
---|---|---|---|
Basic type | Polypropylene |
|
|
Dome type (Clear) | Styrene butadiene copolymer |
|
|
Dome type (White) | Polypropylene | ||
Square type (Clear) | Styrene butadiene copolymer |
|
|
Square type (White) | Polypropylene | ||
Hood type (White) | Polyethylene |
|
-
Dome type
-
Square type
-
Hood type
Specification
Diameter | Type | Dimension | Color | Material | Cat. No. |
---|---|---|---|---|---|
Φ75 mm/ 3.0 inch | Basic (Ø, mm / inch) | 171 / 6.7 | White | Polypropylene | Standard |
Dome (Ø x H, mm / inch) | 400 x 140 / 15.7 x 5.5 | White | Polypropylene | AAAB6221 | |
Clear | Styrene butadiene copolymer | AAAB6211 | |||
Square (W x D x H, mm / inch) | 494 x 390 x 245 / 19.4 x 15.4 x 9.6 | White | Polypropylene | AAAB6241 | |
Clear | Styrene butadiene copolymer | AAAB6231 | |||
Φ50 mm / 2.0 inch | Dome (Ø x H, mm / inch) | 294 x 180 / 11.6 x 7.1 | White | Polypropylene | Clear Dome (Standard) (Optional White Dome) |
Clear | Styrene butadiene copolymer |
※ Ø75 Basic hood is provided as an integral part of the extraction arm and is used for suction of small volumes of material in confined spaces.
※ Ø50 Dome hood is provided as standard on the extraction arm.
-
Quick tilt-adjustable knob
-
360° rotatable joint
-
Damper for airflow rate adjustment
Step 1. Extraction Arm
Type | Description | |
---|---|---|
Material | Polypropylene | Excellent chemical resistance |
Anodized Aluminum 1) | Lightweight, General use | |
Diameter | 50 mm | For fine work |
75mm 2) | Lightweight, General use | |
Joint | 3 Joint | Radius 1480 ~ 1780 mm / 58.3 ~ 70.1 inch |
1) Weak against scratching due to the nature of the material.
2) 75mm radius used in the case of mist.
Specification
Model | Extraction Arm, Length (mm / inch) | Weight (kg / lbs) |
Cat. No. | ||||||
---|---|---|---|---|---|---|---|---|---|
A | B | C | D | Total | |||||
75mm / 3.0 inch diameter,Polypropylene | 3 Joints | AH-3160 | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.4 / 5.3 | AAAB6541 |
75mm / 3.0 inch diameter,Polypropylene, Ceiling mount type | 3 Joints | AH-3160C | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.4 / 5.3 | AAAB6542 |
75mm / 3.0 inch diameter,Anodized Aluminum | 3 Joints | AH-3160A | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.6 / 5.7 | AAAB6533 |
75mm / 3.0 inch diameter,Anodized Aluminum Ceiling mount type | 3 Joints | AH75-3160AC | 250 / 9.8 | 640 / 25.2 | 530 / 20.9 | 260 / 10.2 | 1680 / 66.1 | 2.6 / 5.7 | AAAAB6537 |
50mm / 2.0 inch diameter,Polypropylene | 3 Joints | AH5-3160 | 250 / 9.8 | 9.8 640 / 25.2 | 540 / 21.3 | 250 / 9.8 | 1680 / 66.1 | 1.4 / 3.1 | AAAB6563 |
50mm / 2.0 inch diameter,Polypropylene,Ceiling mount type | 3 Joints | AH5-3160C | 250 / 9.8 | 640 / 25.2 | 540 / 21.3 | 250 / 9.8 | 1680 / 66.1 | 1.4 / 3.1 | AAAB6566 |
Step 2. Bracket & Column
- Column of suitable height is selected based on the ceiling height.
- Excellent durability due to powder coating.
Specification
Model | Dimension (W x D x H, mm / inch) | Suitable for (mm/inch) | Cat. No. |
---|---|---|---|
Ceiling Bracket | 260 x 260 x 2 / 10.2 x 10.2 x 0.08 | 75 / 3.0 | AAAB6508 |
Ceiling Column | 100 x 100 x 250 / 3.9 x 3.9 x 9.8 | 75 / 3.0, 50 / 2.0 | AAAB6512 |
100 x 100 x 500 / 3.9 x 3.9 x 19.7 | AAAB6513 | ||
100 x 100 x 750 / 3.9 x 3.9 x 29.5 | AAAB6514 | ||
100 x 100 x 1000 / 3.9 x 3.9 x 39.4 | AAAB6515 | ||
100 x 100 x 1250 / 3.9 x 3.9 x 49.2 | AAAB6516 | ||
100 x 100 x 1500 / 3.9 x 3.9 x 59.1 | AAAB6517 | ||
Wall Bracket | 158 x 259 x 82 / 6.2 x 10.2 x 3.2 | 75 / 3.0 | AAAB6510 |
Step 3. Hood
Type | Material | Description | |
---|---|---|---|
Basic type | Polypropylene |
|
|
Dome type (Clear) | Styrene butadiene copolymer |
|
|
Dome type (White) | Polypropylene | ||
Square type (Clear) | Styrene butadiene copolymer |
|
|
Square type (White) | Polypropylene | ||
Hood type (White) | Polyethylene |
|
-
Dome type
-
Square type
-
Hood type
Specification
Diameter | Type | Dimension | Color | Material | Cat. No. |
---|---|---|---|---|---|
Φ75 mm/ 3.0 inch | Basic (Ø, mm / inch) | 171 / 6.7 | White | Polypropylene | Standard |
Dome (Ø x H, mm / inch) | 400 x 140 / 15.7 x 5.5 | White | Polypropylene | AAAB6221 | |
Clear | Styrene butadiene copolymer | AAAB6211 | |||
Square (W x D x H, mm / inch) | 494 x 390 x 245 / 19.4 x 15.4 x 9.6 | White | Polypropylene | AAAB6241 | |
Clear | Styrene butadiene copolymer | AAAB6231 | |||
Φ50 mm / 2.0 inch | Dome (Ø x H, mm / inch) | 294 x 180 / 11.6 x 7.1 | White | Polypropylene | Clear Dome (Standard) (Optional White Dome) |
Clear | Styrene butadiene copolymer |
※ Ø75 Basic hood is provided as an integral part of the extraction arm and is used for suction of small volumes of material in confined spaces.
※ Ø50 Dome hood is provided as standard on the extraction arm.