产品
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
Fume Hoods
- HOME
- > 产品
- > Fume Hoods
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
-
-
Digital controller
Anemometer
Performance
- A variety of filters and work surfaces available to suit your specific experimental needs. (refer to accessory section)
- High-quality polyester fiber pre-filter for trapping larger particles and increasing the life of the main HEPA filter.
- Large-capacity blower maintaining sufficient intake flow rate and reducing noise. (less than 55 dB under normal operation)
- Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity.
Convenience
- Easy monitoring of the internal airflow speed thanks to built-in anemometer.
- Comfortable front access to cartridge type of filters for easy replacement.
- Built-in utility hole for easily routing the cords or wires of the equipment placed inside the hood.
- Fully or half openable front door for convenient transport of experimental apparatuses and equipment into or out of the workspace.
Safety
- Efficiency and capacity of activated carbon filters: BS 7989:2001
- Structure, electrical outlet, lighting, and sound level: BS 7258-1:1994
- Local smoke, large volume visualization, face velocity, and tracer gas: ANSI/ASHRAE 110-1995 and NF EN 14175-1
-
-
Digital controller
Anemometer
Performance
- A variety of filters and work surfaces available to suit your specific experimental needs. (refer to accessory section)
- High-quality polyester fiber pre-filter for trapping larger particles and increasing the life of the main HEPA filter.
- Large-capacity blower maintaining sufficient intake flow rate and reducing noise. (less than 55 dB under normal operation)
- Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity.
Convenience
- Easy monitoring of the internal airflow speed thanks to built-in anemometer.
- Comfortable front access to cartridge type of filters for easy replacement.
- Built-in utility hole for easily routing the cords or wires of the equipment placed inside the hood.
- Fully or half openable front door for convenient transport of experimental apparatuses and equipment into or out of the workspace.
Safety
- Efficiency and capacity of activated carbon filters: BS 7989:2001
- Structure, electrical outlet, lighting, and sound level: BS 7258-1:1994
- Local smoke, large volume visualization, face velocity, and tracer gas: ANSI/ASHRAE 110-1995 and NF EN 14175-1
Model | DLH-01G | DLH-11G | |||
---|---|---|---|---|---|
Controller |
Microprocessor control |
||||
Face velocity |
Initial set point: 0.4m/s, 80fpm |
||||
Air flow meter |
Swing vane type |
||||
Main filter |
Chemical Filter (optional 6 different filters) |
||||
Pre filter |
Washable high efficiency nylon filter |
||||
Materials |
Main body, window (front / side) |
2.0mm steel (epoxy powder-coated), 8mm / 6mm thick acrylic resin |
|||
Work surface |
Optional 6 different work surfaces |
||||
Fluorescent light intensity |
> 600lux |
||||
Noise level |
55dB under normal operation |
||||
Dimension(W×D×H) |
Interior (mm / inch) |
880×640×800 / 34.6×25.2×31.5 |
1180×640×800 / 46.5×25.2×31.5 |
||
Exterior without stand (mm / inch) |
900×660×1250 / 35.4×26×49.2 |
1200×660×1250 / 47.2×26×49.2 |
|||
Exterior with stand (mm / inch) |
900×660×1985 / 35.4×26×78.1 |
1200×660×1985 / 47.2×26×78.1 |
|||
Net weight (body) (kg / lbs) |
100 / 220.5 |
118 / 260.1 |
|||
Net weight (body + stand) (kg / lbs) |
120 / 264.6 |
140 / 308.6 |
|||
Electrical requirements (230V) |
50Hz, 0.6A | 60Hz, 0.7A | 50Hz, 0.6A | 60Hz, 0.7A | |
Cat. No. |
AAHB2002K | AAHB2002K | AAHB2012K | AAHB2012K | |
Electrical requirements (100V, 120V) |
100V, 50Hz, 1.5A | 120V, 60Hz, 1.3A | 100V, 50Hz, 1.5A | 120V, 60Hz, 1.3A | |
Cat. No. |
AAHB2004U | AAHB2003U | AAHB2014U | AAHB2013U |
※ Above specifications can be changed without prior notice.
Filters
Cat. No. | Description | Application | DLH-01G | DLH-11G |
---|---|---|---|---|
AAAB2543 |
Complex carbon filter |
All common laboratory chemicals, especially VOC, Organic, Benzene, Toluene, etc |
- | |
AAAB2544 | - | |||
AAAB2545 |
Acid filter 1) |
An acidic solvent ; Acetic acid, etc |
- | |
AAAB2546 | - | |||
AAAB2547 |
Formaldehyde filter |
Formadehyde applications |
- | |
AAAB2548 | - | |||
AAAB2549 |
Ammonia / Amines filter |
Ammonia/Amines by chemisorptions |
- | |
AAAB2550 | - | |||
00EDA0009193 |
HEPA filter |
Biohazardous aerosols and other visible and non-visible particles |
- | |
00EDA0009194 | - | |||
00EDA0009196 |
Pre filter |
- |
- | |
00EDA0009198 | - |
1) Please do not use high percentage of reactive acid such as perchloric acid.
Work surfaces / Stands
Cat. No. | Description | DLH-01G | DLH-11G |
---|---|---|---|
AAAB2501 |
Work surface (SUS #304) |
- | |
AAAB2502 | - | ||
AAAB2503 |
Work surface (SUS #316) |
- | |
AAAB2504 | - | ||
AAAB2513 |
Work surface (phenolic laminate) |
- | |
AAAB2514 | - | ||
AAAB2507 |
Work surface (polypropylene) |
- | |
AAAB2508 | - | ||
AAAB2509 |
Work surface (bakelite) |
- | |
AAAB2510 | - | ||
AAAB2511 |
Work surface (PVC) |
- | |
AAAB2512 | - | ||
AAAB2521 |
Stand with casters |
- | |
AAAB2522 | - |
Gas detector / Gas detecting tubes
Cat. No. | Description | DLH-01G | DLH-11G |
---|---|---|---|
AAAB2531 |
Gas detector |
||
00EAA0001550 |
Gas detecting tube |
||
00EAA0001551 |
Gas detecting tube |
||
00EAA0001552 |
Gas detecting tube |
||
00EAA0001553 |
Gas detecting tube |
||
00EAA0001554 |
Gas detecting tube |
||
00EAA0001555 |
Gas detecting tube |