PRODUCTS
- HOME
- > PRODUCTS
- >
Vacuum Ovens
Optimally constructed for separating solvents from solutions or drying solvents with high boiling points.
Model Name : OV-11/12
Performance
- Temperature range from ambient +5°C to 250°C
- Vacuum range: 0 to 0.1 MPa. (analog vacuum gauge)
- Drying a solvent in vacuum lowers its boiling point, thereby making the separation process easier and eliminating the need to use high temperatures. - Microprocessor PID control / Temperature calibration / Automatic tuning.
- Uniform heat distribution from block type heater attached to the chamber exterior to the anodized aluminum shelves.
Convenience
- Intuitive control panel with bright LED displays. (1°Cresolution)
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Convenient presetting function for 3 most commonly used temperature settings.
- Viton (fluorine rubber) door gasket also available for acidic applications. (optional)
- Heat tempered glass window provides clear inside view of the chambers
- Tight vacuum seal thanks to spring-loaded glass door, silicone gasket, and a push-button latch handle.
- Separate vacuum and vent ports.
- RS-232 interface for external control and data collection.
Safety
- Keypad lock function prevents accidental changes during operation.
- Automatic run after power interruption.
- Over-temperature and over-current protection.
Model | OV-11 | OV-12 | |
---|---|---|---|
Chamber volume (L / cu ft) | 28 / 1 | 65 / 2.3 | |
Vacuum range | 0~0.1MPa, Analog | ||
Nozzle size (mm / inch) | Vacuum Ø10 / 0.4, Vent Ø10 / 0.4 | ||
Temperature | Range (℃ / ℉) | Amb. +5 to 250 / Amb. +9 to 482 | |
Fluctuation 1) (±℃ / ℉ at 100℃) | 0.1 / 0.18 | 0.3 / 0.54 | |
Variation 1) (±℃ / ℉ at 100℃) | 5.0 / 9.0 | ||
Dimension(W×D×H) | Interior (mm / inch) | 302×305×302 / 11.9×12×11.9 | 402×405×402 / 15.8×15.9×15.8 |
Exterior (mm / inch) | 680×453×495 / 26.8×17.8×19.5 | 780×557×595 / 30.7×21.9×23.4 | |
No. of wire shelf (standard / max.) |
2 | 3 | |
Net weight (Kg / lbs) | 63 / 139 | 103 / 227 | |
Electrical requirements (230V, 50 / 60 Hz) | 5.3A | 6.1A | |
Cat. No. | AAH13115K | AAH13125K | |
Electrical requirements (120V, 50 / 60 Hz) | 10A | 11.7A | |
Cat. No. | AAH13116U | AAH13126U |
1) Technical data according to DIN 12880.
for Vacuum ovens
-
Safety covers
-
Viton gaskets
-
Vacuum pumps
-
Cold trap baths
Safety covers
In case of the glass is destroyed, the netted steel frame and polycarbonate sheet cover prevent user from glass splinters.
Cat. No. | Description | Suitable for |
---|---|---|
AAA13603 | Safety cover | OV-11 |
AAA13604 | Safety cover | OV-12 |
Gaskets
Viton (fluorine rubber) door gaskets can be provided upon request.
Cat. No. | Description | Suitable for |
---|---|---|
00FAA0005146 | Silicone gasket | OV-11 |
00FAA0005187 | Viton (fluorine rubber) gasket | |
00FAA0005147 | Silicone gasket | OV-12 |
00FAA0005188 | Viton (fluorine rubber) gasket |
Vacuum pumps
Rotary vacuum pumps with directly connected oil seal prevent air reflux and provide high vacuum pressure for vacuum ovens.
Cat. No. | Description |
---|---|
BEH73205K | W2V10 (230V, 50/60Hz) |
BEH73206U | W2V10 (120V, 60Hz) |
BEA700351 | Oil mist trap (PC) |
BEA700355 | Oil mist trap (metal) |
BEA700353 | Vacuum pump oil (1L) |
BEA700354 | Vacuum pump oil (20L) |
※ In order to get rid of evaporated oil or to block oil in-flow, an optional oil mist trap is recommended. (refer to page 107 for additional information.)
Cold trap baths
CTB-10 cold trap baths equipped with two U-type glass traps prevent a vacuum pump from vapors or contamination.
Cat. No. | Description |
---|---|
AAH62011K | CTB-10 (230V, 60Hz) |
AAH62012K | CTB-10 (230V, 50Hz) |
00FCA0001110 | U-type glass trap (1ea) |
Related products for vacuum ovens
※ In order to get rid of evaporated oil or to block oil in-flow, an optional oil mist trap is recommended. (refer to page 107 for additional information.)