产品
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
Incubators
- HOME
- > 产品
- > Incubators
Incubators
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
Performance
- Temperature range from ambient +3°C to 60°C.
- Microprocessor PID control / Temperature calibration / Automatic tuning.
- Vibration-free design ideal for yeast cultivation.
- Free from noise, vibration, and mechanical troubles by film type heating method.
Convenience
- Intuitive control panel with bright LED display. (0.1℃resolution)
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Convenient preset function for 3 most commonly used temperature settings.
- Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
- Rounded inner chamber corners for easy cleaning and optimal airflow.
- Stackable up to 2 units using the optional stacking kit. (optional)
Safety
- Automatic run after power interruption.
- Keypad lock function prevents accidental changes during operation.
- Over-temperature and over-current protection.
- Audible and visible open door alarms.
Model | IB-01E | IB-11E | IB-21E | |
---|---|---|---|---|
Chamber volume (L / cu ft) | 65 / 2.3 | 150 / 5.3 | 205 / 7.2 | |
Temperature | Range (℃ / ℉) | Amb. +3 to 60 / Amb. +5.4 to 140 | ||
Fluctuation 1) at 37℃ (±℃ / ℉) | 0.2 / 0.36 | 0.3 / 0.54 | 0.1 / 0.18 | |
Variation 1) at 37℃ (±℃ / ℉) | 0.6 / 1.08 | 0.8 / 1.44 | 1.1 / 1.98 | |
Dimension (W×D×H) | Interior (mm / inch) |
423×355×445
/ 16.7×14×17.5 |
500×515×585
/ 19.7×20.3×23 |
632×515×630
/ 24.9×20.3×24.8 |
Exterior (mm / inch) |
533×475×725
/ 21×18.7×28.5 |
595×630×865
/ 23.5×24.8×34 |
740×630×910
/ 29.1×24.8×35.8 | |
No. of wire shelf (standard/ max.) | 2 / 10 | 2 / 13 | 2 / 14 | |
Net weight (Kg / lbs) | 33 / 72.8 | 47 / 103.6 | 57 / 125.7 | |
Electrical requirements (230V, 50 / 60Hz) | 1.1A | 2.2A | 2.4A | |
Cat. No. | AAH26015K | AAH26025K | AAH26035K | |
Electrical requirements (120V, 50 / 60Hz) | 2.1A | 4.2A | 4.6A | |
Cat. No. | AAH26016U | AAH26026U | AAH26036U |
1) Technical data according to DIN 12880.
-
Wire shelves
-
Perforated shelves
Wire shelves
Stainless steel and electro-polished shelves are readily removed without using tools for easy cleaning.
Cat. No. | Description | Suitable for | ||
---|---|---|---|---|
Included | Maximum | W×L (mm / inch) | ||
00EDA0008136 | 2 | 5 | 366×316 / 14.4×12.4 | IB-01E |
00EDA0008220 | 2 | 7 | 466×490 / 17.6×19.3 | IB-11E |
00EDA0008219 | 2 | 7 | 566×466 / 22.3×17.6 | IB-21E |
Perforated shelves
Stainless steel shelves are readily removed without using tools for easy cleaning.
Cat. No. | Description | Suitable for | |
---|---|---|---|
Maximum | W×L (mm / inch) | ||
AAA12531 | 5 | 366×316 / 14.4×12.4 | IB-01E |
AAA12522 | 7 | 466×490 / 17.6×19.3 | IB-11E |
AAA12535 | 7 | 566×466 / 22.3×17.6 | IB-21E |
Stacking kits
Stackable up to 2 units using exclusive stacking kits for space saving.
Cat. No. | Description | Suitable for |
---|---|---|
AAA26501 | Stacking kits for stackable chambers | IB-01E |
AAA26502 | Stacking kits for stackable chambers | IB-11E |
AAA26503 | Stacking kits for stackable chambers | IB-21E |