JeioTech manufacturer of Lab Companion

PRODUCTS

Incubators

HOME
> PRODUCTS
> Incubators

Incubators

Incubated Shakers (Tabletop)

Digital incubating/ refrigerating benchtop shakers.

with optional dedicated platform and universal attachment

Model Name : IST-3075/3075R/4075/4075R

BROCHURE URL COPY Inquiry Form

Control display

Performance

Temperature range:
- Ambient +5°C to 80°C for IST-3075 / 4075.
- Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R.
Competitive high shaking speed up to 500 rpm.
Orbital shaking motion in 19mm diameter.
Microprocessor PID control.
Three point temperature calibration / Automatic tuning.
Wide speed range even with heavy workload.
- Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
Pleasant test environment by the smooth acceleration and deceleration control.
- Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

Intuitive touch screen LCD controller with easy icons and logical menus.
Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
Wide sample monitoring and convenient sample loading.
- Convenient sample monitoring without affecting inside environment thanks to the three side transparent acryl lid with bright LED lamps.
- Gas spring lid supports providing smooth motion, soft opening and closing.
Repetitive task can be easily performed as the platform stops where it starts.
- Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
Corrosion resistance stainless steel interior.
Built-in RS-232 port and USB port for external control and data collection.
Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (when purchased LC GreenBox)

Safety

Automatic run after power interruption.
Temperature and shaking speed deviation alarm.
Over-current protection, Stalled platform check.
Mechanical over-temperature protection device.
Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)
Audible and visible open door alarms.

Model		IST-3075		IST-3075R		IST-4075		IST-4075R
Temperature	Range (℃ / ℉)	Amb. +5 to 80 / Amb. +9 to 176		Amb. -15 (Min. 15) to 80 /Amb. -27 (Min. 27) to 176		Amb. +5 to 80 / Amb. +9 to 176		Amb. -15 (Min. 15) to 80 /Amb. -27 (Min. 27) to 176
	Fluctuationat 37℃ in flask (±℃ / ℉)	0.1 / 0.18
	Variationat 37℃ in flask (±℃ / ℉)	0.5 / 0.90
	Refrigerator (Hp)	-		1 / 6 HBP		-		1 / 6 HBP
Shaking system	Motion type	Orbital
	Amplitude size (mm / inch, dia.)	19.1 / 0.75
	Speed range (RPM)	20 to 500
	Accuracy	±1% of set speed (>100rpm) / ±1 (≤100rpm)
	Timer	1 min. to 999 hr 59 min.
	Max. load (kg / Ibs)	10 / 22.0 at 500 rpm15 / 33.1 at 400 rpm				14 / 30.9 at 500 rpm21 / 46.3 at 400 rpm
Dimension	Volume (L / cu ft)	53 / 1.9				83 / 2.9
	Platform (W×D) (mm / inch)	350×350 / 13.8×13.8				450×450 / 17.7×17.7
	Interior (W×D×H) (mm / inch)	410×410×320 / 16.1×16.1×12.6				510×510×320 / 20.1×20.1×12.6
	Exterior (W×D×H) (mm / inch)	440x785x510 / 17.3x30.9x20.1				540x 890 x510 / 21.3x35x20.1
	Net weight (Kg / lbs)	65 / 143.3		73 / 160.9		81 / 178.6		90 / 198.4
Electrical requirements (230V)		60Hz, 4A	50Hz, 4A	60Hz, 5.5A	50Hz, 5.5A	60Hz, 4A	50Hz, 4A	60Hz, 5.5A	50Hz, 5.5A
Cat. No.		AAH 23422K	AAH 23422K	AAH2 3522K	AAH 23522K	AAH 23622K	AAH 23622K	AAH 23722K	AAH2 3722K
Electrical requirements (120V)		60Hz, 7.5A		60Hz, 10.1A		60Hz, 7.5A		60Hz, 10.1A
Cat. No.		AAH23465U		AAH23565U		AAH23665U		AAH23765U

※ Above specifications can be changed without prior notice.

for Incubated Shakers

Flask clamps
Plastic clamps (plastic)
Funnel clamps
Dedicated platforms

Universal platforms / Flask clamps / Funnel clamps

Universal platforms provide flexibility for mixing assortments of test tubes and glassware of varying sizes on a single platform. Various clamps for Erlenmeyer flasks and separatory funnels are available.

Description			IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Cat. No.	Universal platform		AAA23501-V3	AAA23502-V3	AAA23503-V3	AAA23501-V3	AAA23502-V3
-	Flask clamps (Stainless steel)	Erlenmeyer flask size	Max. mountable flask clamps
AAA23550		for 50 mL	36	49	88	36	49
AAA23551		for 100 mL	24	39	68	24	39
AAA23552		for 250 mL	14	20	39	14	24
AAA23556		for 300 mL	14	20	39	14	24
AAA23553		for 500 mL	9	16	28	9	16
AAA23554		for 1L	6	9	18	6	9
AAA23555		for 2L	4	5	11	4	6
AAA23557		for 2.8L	2	4	8	2	5
AAA23558		for 4L	-	-	6	-	4
AAA23559		for 6L	-	-	5	-	2
-	Flask clamps (plastic) 1)	Erlenmeyer flask size	Max. mountable flask clamps
AAA30570		for 50 mL	36	49	88	36	49
AAA30571		for 100 ~ 125 mL	19	29	48	19	29
AAA30572		for 200 mL	13	21	35	13	21
AAA30573		for 250 mL	13	19	35	13	19
AAA30574		for 300 mL	12	19	35	12	19
AAA30575		for 500 mL 2)	9	12	24	9	12
AAA30576		for 1L 2)	4	9	12	5	9
AAA30577		for 2L 2)	2	4	8	4	5
-	Funnel clamps	separatory funnel size	Max. mountable funnel clamps
AAA23562		for 250 mL	4	6	15	4	6
AAA23563		for 500 mL	2	4	10	3	4
AAA23564		for 1L	-	3	7	-	3
AAA23565		for 2L	-	-	5	-	-

※ Above accessories need to be mounted on a universal platform which is sold separately.

1) In the case of plastic flask clamps mounting, deformation may occur at temperatures over 40°C. Stainless steel flask clamps are recommended when using over 40°C and high temperature environment.
2) Possible to use under 300 rpm

Dedicated platforms

When using a single flask size only, the dedicated platforms with pre-installed clamps provide maximum capacity. 250mL and 500mL clamps arestandard but other sizes can be available.

Description	IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Universal platform &250mL flask clamps	AAA23611-V1	AAA23623-V1	AAA23634	AAA23611-V1	AAA23621-V1
No. of flask clamps	14	20	39	14	20
Universal platform &500mL flask clamps	AAA23612-V1	AAA23622-V1	AAA23635	AAA23612-V1	AAA23622-V1
No. of flask clamps	9	16	28	9	16

* A dedicated platform is sold with setting each max. mountable amount of flask clamps on.

Test tube racks
Microplate holders
Rubber mats

Test tube racks

Easy to release and mount racks made of durable stainless steel with adjustable angle and tube height support. Test tube racks are used with an optional universal platform.

Description		IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Cat.No.	Universal platform	AAA23501-V3	AAA23502-V3	AAA23053-V3	AAA31501-V3	AAA23502-V3
-	Test tube size	Mountable capacity of rack*
AAA23581	for 86 test tubes, Ø8mm / Ø0.3˝	2	4	7	2	4
AAA23582	for 86 test tubes, Ø10mm / Ø0.4˝
AAA23583	for 58 test tubes, Ø12mm / Ø0.5˝
AAA23584	for 58 test tubes, Ø14mm / Ø0.6˝
AAA23585	for 32 test tubes, Ø17mm / Ø0.7
AAA23586	for 19 test tubes, Ø25mm / Ø1.0˝
AAA23587	for 10 test tubes, Ø30mm / Ø1.2˝
AAA23594	for 10 test tubes, Ø35mm / Ø1.4˝
AAA23593	for 4 test tubes, Ø50mm / Ø1.9˝

* No declination
※ We can manufacture other size of test tube racks to meet your specific requirements. Contact us for details.

Microplate holders

Available in three styles: tower type, flat type (small and large), and single type. Tower type holder is for 10 standard or deep well plates. Large flat holder is for 4 standard or deep well plates. Small flat holder is for 3 standard or deep well plates. Single type holder is for 1 standard or deep well plate. (standard well plates’ height: 14.7mm)

Description		IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Cat.No.	Universal platform	AAA23501-V3	AAA23502-V3	AAA23053-V3	AAA31501-V3	AAA23502-V3
-	Microplate holder type	Max. mountable microplate holders
AAA23654	Single	8	15	25	8	15
AAA23651	Tower	5	8	21	6	10
AAA23652	Flat A(large)	-	2	4	-	2
AAA23653	Flat B(small)	2	2	6	2	3

* Microplate holders need to be mounted on an universal platform which is sold separately.

Rubber mats

Designed for low-speed applications, non-skid rubber mats allow quick addition or removal of flasks, plates or tubes.

Description	IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Cat. No	AAA23531	AAA23532	AAA23534	AAA23531-V1	AAA23532-V1

Spring wire racks
(two tier rack with flexible crossed spring)
Universal attachments
Lab sticker
Retractable foot caster

Spring wire racks

Ideal for holding a wide variety of tubes, flasks, and other glassware. All components are made of stainless steel.

Description	IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Cat. No.	AAA23521-V1	AAA23522-V2	AAA23514	AAA31521-V1	AAA31522-V1
-	Erlenmeyer flask size	Max. inserting flasks
for 50 mL	16	25	45	16	25
for 100 mL	9	16	28	9	16
for 250 mL	4	9	18	4	9
for 300 mL	4	9	18	4	9
for 500 mL	4	5	15	4	5
for 1L	2	4	10	2	4
for 2L	1	2	6	1	2
for 2.8L	1	2	4	1	2

Universal attachments (utility carriers)

Several adjustable clamping bars for quickly securing a variety of glassware or tubes on non-skid rubber mats. Suitable for flat-bottomed flasks of various sizes.

Description	IST-3075/R	IST-4075/R	ISF-7100/R ISF-7200/R	ISS-3075/R	ISS-4075/R
Cat. No.	AAA23511-V1	AAA23512-V1	AAA23505	AAA23511-V1	AAA23512-V1

Lab sticker

An alternative method for securing vessels to a shaker platform. Ideal for containers such as bottles and dishes that cannot be held on the universal platform with conventional flask clamps. For safe operation, gradual RPM increase is recommended.

Cat. No.	Description (W×D×H) (mm / inch)
AAA30551	200×200×5 / 7.9×7.9×0.2

Gateway

Establish Jeio Tech Network by Gateway. No computer use is required at all. Remote monitoring of operating status through a mobile phone is simply available when you place a Gateway in your laboratory. Maximum 4 units can be connected to Gateway by RS-232 cable.

Cat. No.	Description
AAHQ1011K	Gateway (2.4GHz, 100~240V, 50/60Hz)

LC GreenBox

Real-time monitoring and control of device operation via mobile app.
Up to 4 devices can be connected at once.