Welcome to Jeiotech !

	Temp. & Humid. (Floor type)
	Temp. & Humid. (Table-top type)
	Temp. & Humid. (TG / ICH type)
	Clean Temp. & Humid.
	Plant growth

Home > Products > Environmental chamber > Temperature & Humidity chamber (Table-top type)

Temperature & Humidity chamber (Table-top type)

Compact size and light weight
Select your optimum chamber from a full variation - this series provide three variations in temperature (& humidity) range of -20 to 150℃, 0 to 120℃, -20 to 120℃ with upmost 20 to 95% RH.

	TH-ME/PE-025
	TC-ME-025 (25L)
	TH-ME/PE-065
	TC-ME-065 (65L)
	TH-ME/PE-100
	TC-ME-100 (100L)

User-friendly design
• Small size & light weight
• Compact design with high performance
• Select your optimum chamber from a full variation
  - The series provide three variations in temperature (& humidity) range of -20 to 150℃, 0 to 120℃, -20 to 120℃/
    upmost 30 to 95% RH, and three capacities of 20L, 65L, and 100L, with a total 9 models altogether
• Efficient system with durable materials
  - The evaporating system for better thermal efficiency with corrosion-resistant materials
  - The heating system with minimized potential heat when heating or cooling for prompt reaction time
    and advanced performance
• Water tank for easy water supply
  - Maintenance can be done easily from the front side
• Inner glass window for observation
  - A tempered window provides a clear view of your specimen during testing
• Access port for running in wires
  - Basic hole of 50mm diameter cable port is standard on the left side of chambers for wiring to the specimen.
    We also provide additional 50 or 80mm diameter cable port (Optional)
• Optional stand for space-saving layout
  - For use in limited space, we provided stand with casters for staking up two chambers
  * Be sure to secure the stand onto floor with earthquake resistant fitting for your safety when using stand.

Control operation
• Microprocess PID control/ Auto-tuning/ Calibration
• Digital LCD display with touch-sensitive 7 keypads
• Easy operation with wide LCD screen
- Temperature & humidity/ timer settings and operating condition
• The program patterns are memorized for 10 years even though the main power switch off, thanks to a PCB built-in battery
• Expanded parameters input - Performance by convenient letters

• Programming operation

Description	TH-ME/ PE, TC-ME series
Programmable pattern capacity	30
Pattern repeat time	999
Max. segments per a pattern	100
Available max. segments *	100
Programmable process time per a segment	0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000,
so you need to arrange the number of segment and patterns properly.

• Computer interface (optional)
  - Available to save all data in Excel
  - Provide a software
  - The program information, setting values backup/ recovery, and temperature/ humidity values storage
• Recorder (optional)
  - 6-point dots type recorder with digital display

Safety functions
• Leakage breaker for power supply
• Over current protector
• Overheat/ overcool protectors
• Switch-off after alarm for over heating
• Water empty (TH-ME/ TH-PE only)
• Door opening alarm

Model		TH-ME-025	TH-ME-065	TH-ME-100
Chamber volume(L/cu ft)		25 / 0.9	65 / 2.3	100 / 3.53
Control system		BDBC2 system - Balanced Dehumidifying & Bath Cooling Control
Controller		Program controller (LCD type)
Temperature	Range(℃/℉)	-20 to 150 / -4 to 302 - without humidity
	Fluctuation¹⁾(±℃/℉) at 25℃ / 60%RH	0.2 / 0.36	0.3 / 0.55	0.2 / 0.36
	Variation¹⁾(±℃/℉) at 25℃ / 60%RH	0.3 / 0.55	0.3 / 0.55	0.3 / 0.55
Time	Heating-without humidity(Min.)	55 From -15℃ to 120℃ (5℉ to 248℉)
	Cooling-without humidity(Min.)	60 From 20℃ to -15℃ (68℉ to 5℉) on single point control *
Humidity	Range(%RH)	55 to 95 at 15℃ (59℉)
		40 to 95 at 30℃ (86℉)
		30 to 95 at 70℃ (158℉)
		30 to 95 at 70 to 85℃ (158℉ to 185℉)
	Fluctuation¹⁾(±%RH) at 60%RH / 55℃	1.6	0.4	0.5
	Variation¹⁾(±%RH) at 60%RH / 55℃	3	3	3
Refrigeration	System	Mechanical single stage refrigerator system (air-cooled condenser)
	Refrigerant	R-404A
	Capacity(W)	250	250	375
Cooler		Plate fin cooler (copper)
Heater	Material	Ni-Cr Wire Heater / SUS sheath Heater
	Drying bulb(W)	800	1000	1000
	Humidity bulb(W)	800	1000	1000
Sensor	Temperature	Pt 100
	Humidity	Electronic sensor - Free of drying a wet pack and good reaction time
Materal	Interior	Stainless steel #304
	Exterior	Steel, 1.0mm (0.04”)/ Double painted & baked
	Insulation	Polyurethane foam 50mm (1.97”)
	Door	Glass wool
Air flow		Sirocco fan (60W)
Water tank	Capacity(L/cu ft)	5 / 0.18	6 / 0.21	9 / 0.32
	Water quality	pH6.2 to 7.2/ Electrical conductivity 20㎲/cm to below
Dimensions (WxDxH)	Interior(mm/inch)	350x220x350 / 13.8x8.7x13.8	400x330x495 / 15.7x13.0x19.5	500x380x530 / 19.7x15.0x20.9
	Exterior(mm/inch)	500x760x850 / 19.7x29.9x33.5	550x890x1000 / 21.7x35.0x39.4	650x1000x1030 / 25.6x39.4x40.6
	Net weight(kg/lbs)	80 ±5 / 176.0 ± 11.0	110 ±5 / 242.0 ± 11.0	130 ±5 / 286.0 ±11.0
Cable access hole		Basically one hole provided/ Ø 50mm (2.0") Optionally max. two holes available/ Ø 50 or 80mm (2.0 or 3.2")
Electrical Requirements (220V)		60Hz/ 1ph/ 12.3A	60Hz/ 1ph/ 13.2A	60Hz/ 1ph/ 14.4A
Cat. No.		AAH82111	AAH82121	AAH82131
Electrical Requirements (230V)		50Hz/ 1ph/ 11.9A	50Hz/ 1ph/ 12.7A	50Hz/ 1ph/ 13.8A
Cat. No.		AAH82112	AAH82122	AAH82132

1) Technical data. (according to DIN 12880, IEC 60068)
* 80mm cable access hole is NOT available for 25L chamber. (TH-ME-025)
* Above the dimension are NOT included size of attached accessories.
※ Permissible Environmental Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%

Model		TH-PE-025	TH-PE-065	TH-PE-100
Chamber volume (L/cu ft)		25 / 0.9	65 / 2.3	100 / 3.53
Control system		BDBC2 system - Balanced Dehumidifying & Bath Cooling Control
Controller		Program controller (LCD type)
Temperature	Range(℃/℉)	0 to 120 / 32 to 248 - without humidity
	Fluctuation¹⁾(±℃/℉) at 25℃ / 60%RH	0.2 / 0.36	0.3 / 0.55	0.2 / 0.36
	Variation¹⁾(±℃/℉) at 25℃ / 60%RH	0.3 / 0.55	0.3 / 0.55	0.3 / 0.55
Time	Heating-without humidity(Min.)	40 From 0℃ to 120℃ (32℉ to 248℉)
	Cooling-without humidity(Min.)	30 From 20℃ to 0℃ (68℉ to 32℉) on single point control *
Humidity	Range(%RH)	60 to 95 at 15℃ (59℉)
		45 to 95 at 30℃ (86℉)
		35 to 95 at 70℃ (158℉)
		35 to 95 at 70℃ to 85℃ (158℉ to 185℉)
	Fluctuation¹⁾(±%RH) at 60%RH / 55℃	1.6	0.4	0.5
	Variation¹⁾(±%RH) at 60%RH / 55℃	3	3	3
Refrigeration	System	Mechanical single stage refrigerator system (air-cooled condenser)
	Refrigerant	R-134A
	Capacity(W)	250	250	375
Cooler		Plate fin cooler (copper)
Heater	Material	Ni-Cr wire heater / SUS sheath Heater
	Drying bulb(W)	800	1000	1000
	Humidity bulb(W)	800	800	1000
Sensor	Temperature	Pt 100
	Humidity	Electronic sensor - Free of drying a wet pack and good reaction time
Materal	Interior	Stainless steel #304
	Exterior	Stainless steel, 1.0mm (0.04”)/ Double painted & baked
	Insulation	Polyurethane foam 50mm (1.97”)
	Door	Glass wool
Air flow		Sirocco fan (60W)
Water tank	Capacity(L/cu ft)	5 / 0.18	6 / 0.21	9 / 0.32
	Water quality	pH6.2 to 7.2/ Electrical conductivity 20㎲/cm to below
Dimensions (WxDxH)	Interior(mm/inch)	350x220x350 / 13.8x8.7x13.8	400x330x495 / 15.7x13.0x19.5	500x380x530 / 19.7x15.0x20.9
	Exterior(mm/inch)	500x760x850 / 19.7x29.9x33.5	550x890x1000 / 21.7x35.0x39.4	650x1000x1030 / 25.6x39.4x40.6
	Net weight (kg/lbs)	80 ±5 / 176.0 ±11.0	110 ±5 / 242.0 ±11.0	130 ±5 / 286.0 ±11.0
Cable access hole		Basically one hole provided/ Ø 50mm (2.0") Optionally max. two holes available/ Ø 50 or 80mm (2.0 or 3.2")
Electrical Requirements (220V)		60Hz/ 1ph/ 12.3A	60Hz/ 1ph/ 13.2A	60Hz/ 1ph/ 14.4A
Cat. No.		AAH82211	AAH82221	AAH82231
Electrical Requirements (230V)		50Hz/ 1ph/ 11.9A	50Hz/ 1ph/ 12.7A	50Hz/ 1ph/ 13.8A
Cat. No.		AAH82212	AAH82222	AAH82232

1) Technical data. (according to DIN 12880, IEC 60068)
* 80mm cable access hole is NOT available for 25L chamber. (TH-PE-025)
* Above the dimension are NOT included size of attached accessories.
※ Permissible Environmental Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%

Model		TC-ME-025	TC-ME-065	TC-ME-100
Chamber volume(L/cu ft)		25L / 0.9	65 / 2.3	100 / 3.53
Control system		Cooling PID control system
Controller		Program controller (LCD type)
Temperature	Range(℃/℉)	-20 to 120 / -4 to 248
	Program control (℃/℉)	-15 to 120 / 5 to 248
	Fluctuation¹⁾(±℃/℉) at 100℃	0.4 / 0.72	0.3 / 0.55	0.3 / 0.55
	Variation¹⁾(±℃/℉) at 100℃	2.0 / 3.60	1.9 / 3.42	1.8 / 3.24
Time	Heating(Min.)	55 From -15℃ to 120℃ (5℉ to 248℉)
	Cooling(Min.)	60 From 20℃ to -15℃ (68℉ to -4℉) on single point control *
Refrigeration	System	Mechanical single stage refrigerator system (air-cooled condenser)
	Refrigerant	R-404A
	Capacity(W)	250	250	375
Cooler		Plate fin cooler (copper)
Heater	Material	Ni-Cr wire heater
	Drying bulb(W)	800	1000	1000
Temperature sensor		Pt 100
Materal	Interior	Stainless steel #304
	Exterior	Stainless steel, 1.0mm (0.04”)/ Double painted & baked
	Insulation	Polyurethane foam 50mm (1.97”)
	Door	Glass wool
Air flow		Sirocco fan (60W)
Dimensions (WxDxH)	Interior(mm/inch)	350x220x350 / 13.8x8.7x13.8	400x330x495 / 15.7x13.0x19.5	500x380x530 / 19.7x15.0x20.9
	Exterior(mm/inch)	500x760x850 / 19.7x29.9x33.5	550x890x1000 / 21.7x35.0x39.4	650x1000x1030 / 25.6x39.4x40.6
	Net weight(kg/lbs)	75 ±5 / 165.0 ±11.0	100 ±5 / 220.0 ±11.0	110 ±5 / 242.0 ±11.0
Cable access hole		Basically one hole provided/ Ø 50mm (2.0") Optionally max. two holes available/ Ø 50 or 80mm (2.0 or 3.2")
Electrical Requirements (220V)		60Hz/ 1ph/ 8.8A	60Hz/ 1ph/ 9.7A	60Hz/ 1ph/ 10.5A
Cat. No.		AAA86011	AAA86021	AAA86031
Electrical Requirements (230V)		50Hz/ 1ph/ 8.4A	50Hz/ 1ph/ 9.3A	50Hz/ 1ph/ 10.0A
Cat. No.		AAH86012	AAH86022	AAH86032

1) Technical data. (according to DIN 12880, IEC 60068)
* 80mm cable access hole is NOT available for 25L chamber. (TC-ME-025)
* Above the dimension are NOT included size of attached accessories.
※ Permissible Environmental Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%

Recording range: -60 to 150℃/ 0 to 100% RH

Paper wide: 100mm

Portable type

6 dots (Temperature: 5 dots, Humidity: 1 dot)

Digital display

Free power supply (100V to 240V)

A through hole of 50 or 80mm dia. (2.0 or 3.2" dia.) is provided on the wall of chamber to allow electrical cables to be introduced into the chamber. A 50mm hole is provided, maximum two holes (50 or 80mm) are optional.

Equipped with rubber plug.

Standard 50mm hole is on the left side.

- For use in limited space, we provided stand with casters for staking up two chambers
* Be sure to secure the stand onto floor with earthquake resistant fitting for your safety
when using stand.

A signal light to light up when malfunction occurs. Can be located upper plate of unit.

Stainless steel and electro polished shelf system is removed easily without using tools for easy cleaning.

Stainless steel shelf system is removed easily without using tools for easy cleaning.