Welcome to Jeiotech !

	Incubated & Refrigerated (Floor type)
	Incubated & Refrigerated (Bench-top type)
	Shaker (Open-air type)
	Separatory funnel

Home > Products > Shaker > Incubated & Refrigerated shaker (Bench-top type)

Incubated & Refrigerated shaker (Bench-top type)

Digital incubating & refrigerating benchtop shakers
Combines a benchtop incubator, refrigerator with dual-action in orbital and reciprocating shakers. Fulfills a variety of molecular biology, general incubation, and cell culture applications.

	SI-300 (53L)
	SI-600 (83L)
	SI-300R (53L)
	SI-600R (83L)

Shaking features
• Select between orbital or reciprocating action
• Speed range: 10 to 300 rpm
• Programmable shaking motion
  - Run time: 10 sec to 999 hr 59 min 59 sec
  - Forward & Backward, Pause: 10 sec to 59 min 50 sec
• Maximum orbit size: 40mm dia. (1.6” dia.)

Operating features
• 5℃ above room temperature to 60℃ for SI-300, 600
  15℃ to 60℃ for SI-300R, 600R
• Uniformity ±1.0℃ at 38℃ (based on various conditions)
• Microprocess PID control/ Auto-tuning/ Calibration
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
• Over-temperature limiter/ Door opening alarm
• Digital LED display for temperature (0.1℃ resolution), speed, and shaking motions
• 3 different temperature values memorable
• 9 steps of temperature profiles programmable and repeat up to 200 cycles
• Adjustable fan speed within 3 steps
• RS-232 interface available

Constructional features
• Brushless DC motor for long maintenance-free operation
• High-velocity fans ensure rapid thermal recovery and excellent variation
• Air spring door and lid-guard against sudden closures
• Transparent Acryl lid and inner lamp function allow observation of flask contents
• Use CFC-free refrigerant (for SI-300R, 600R)

Model		SI-300	SI-300R		SI-600	SI-600R
Temperature	Range(℃/℉)	Amb. +5 to 60 (Amb. +9 to 140) for SI-300, 600 +15 to 60 (+59 to 140) for SI-300R, 600R
	Fluctuation¹⁾ at25℃, 37℃(R type) (±℃/℉)	0.3 / 0.54	0.6 / 1.08		0.1 / 0.18	0.2 / 0.36
	Variation¹⁾ at 37℃ (±℃/℉)	1.6 / 2.88	1.5 / 2.7		0.7 / 1.26	0.3 / 0.54
	Refrigerator	-	1/8 HBP (220V,230V)		-	1/8 HBP (220V,230V)
			1/6 HBP (100V,120V)			1/6 HBP (100V,120V)
Shaking system	Motion type	Orbital or Reciprocating motion selectable
	Frequency (RPM)	10 to 300
	Timer	Run time: 10 sec to 999 hr 59 min 59sec Forward & Backward, Pause: 10 sec to 59 min 50 sec
	Orbit size (mm/inch dia.)	20, 30, 40 / 0.8, 1.2, 1.6 Available - Standard 30 / 1.2
	Recip. stroke length (mm/inch)	20, 30, 40 / 0.8, 1.2, 1.6 Available - Standard 30 / 1.2
Dimensions	Volume (L/cu ft)	53 / 1.9			83 / 2.9
	Platform (W×L), (mm/inch)	350×350 / 13.8×13.8			450×450 / 17.7×17.7
	Internal (W×L×H), (mm/inch)	410×410×320/ 16.1x16.1x12.6			510×510×320/ 20.1x20.1x12.6
	Overall (W×L×H) (mm/inch)	442×740×622/ 17.4x29.1x24.5			540×850×625/ 21.3x33.5x24.5
	Net weight (Kg/lbs)	74.0/163.0	85.0/187.0		91.0/200.0	102.0/225.0
Electrical Requirements (230V)		50/60Hz, 4.0A	60Hz, 5.5A	50Hz, 5.5A	50/60Hz, 4.0A	60Hz, 5.5A	50Hz, 5.5A
Cat. No.		AAH23105K	AAH23111K	AAH23112K	AAH23205K	AAH23211K	AAH23212K
Electrical Requirements (120V)		50/60Hz, 7.5A	60Hz, 10.1A		50/60Hz, 7.5A	60Hz, 10.1A
Cat. No.		AAH23106U	AAH23113U		AAH23206U	AAH23213U

1) Technical data (according to DIN 12880)

The universal platforms provide flexibility for mixing different size test tubes and glassware on a single platform. Available various sizes of clamps for Erlenmeyer flasks and Separating funnels.

If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed. Provided standard clamp size are 250mL and 500mL, but possibly provide the other size of clamps also.

Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel.

The non-skid rubber mats are designed for low-speed applications, allow for quick placing or putting away of flasks, plates or tubes.

Several adjustable clamping bars to quickly secure a variety of glassware or tubes utilities on non-skid rubber mat. Suitable for different sizes of flat bottomed flasks.

Highly durable stainless steel racks with adjustable angle and tube height support. Simply release and mount racks. Requires an universal platform which are sold separately.

Available in three styles. a Tower type holders, two Flat types (small and large) and a Single type. The tower holders will hold 9 standard plates or 3 deep well plates. The large flat holders will hold 4 standard or deep well plates. The small flat holders will hold 3 standard or deep well plates. The single holders will hold only 1 standard or deep well plate.

Alternative to flask clamps for securing vessels to a shaker platform. Ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps. Refer to the below maximum RPM for each flask sizes. Sticky pad can be re-generated to like-new condition by washing with mild detergent and water. It cannot be used in water baths. For safe operation, suggest increasing the RPM gradually.