go home go contact go sitemap go korean
logo
Products Accessories Support About us Registration
product
Aboutus
For oven
For incubator
For shaker
For bath & circulator
For environmental chamber
For e
Registration
CLS Control system
Contact
Home > accressories > For environmental chamber
For environmental chamber


A observation window is installed ONLY on all floor type chambers. (TH/ TC series and TH-CR-270) A tempered dual windows provided a clear view of your specimen during testing. Improved lighting provided.



A inner glass door is provided inside the chamber door so that specimens can be observed. Applicable to some of floor type chambers. (TH-G, I-180, 300, 408L/ TC-180, 300, 408L and TH-CR-270 ONLY) All of the tabletop chambers are provided one inner glass door.



Temperature and Humidity recorder (digital)

Recording range: -60 to 150℃/ 0 to 100% RH
Paper wide: 100mm
Portable type
6 dots (Temperature: 5 dots, Humidity: 1 dot)
Digital display
Free power supply (100V to 240V)



A through hole of 50 or 80mm dia. (2.0 or 3.2" dia.) is provided on the wall of chamber to allow electrical cables to be introduced into the chamber. A 50mm hole is provided, maximum two holes (50 or 80mm) are optional.

Equipped with rubber plug.
Standard 50mm hole is on the left side.



Water supply system to supply pure water for humidification.

Cartridge type water tank for easy water supply
Maintenance can be done easily from the front side
A center window allow to check the amount of water remaining easily



Wire and perforated type shelves (included shelf brackets) are made of durable stainless steel. Standard specification shelves and shelf brackets are added as required.



A signal light to light up when malfunction occurs. Can be located upper plate of unit.

 
Water purifier with reverse osmosis membrane. Can be installed optionally.

for TH-G/I/GU, TC-G/GU, and TH-CR series
Cat. No. Description Models
TH-G TH-I TC-G TH-CR-270
AAA80500 Recorder (6 points)
AAA80540 Interface converter included a cable (5m/ 16.4ft)
AAA80542 Interface cable (5m/ 16.4ft)
AAA80550 Warning signal lamp
AAA80560 Inner glass door (only for 180L chamber) -
AAA81551 Inner glass door (only for 270, 300, 408L chambers)
STT1040 Wire shelf for TH-CR-270 - - -
EDA8212 Wire shelf for TH-G-180/ TH-I-180/ TC-G-180 -
EDA8213 Wire shelf for TH-G/I/GU-300, TC-G/GU-300 -
EDA8214 Wire shelf for TH-G-408/ TH-I-408/ TC-G-408 -
EDA8215 Wire shelf for TH-G-800/ TH-I-800/ TC-G-800 - -
EDA8216 Wire shelf for TH-G-1000/ TH-I-1000/ TC-G-1000 - -
AAA80630-1 Perforated shelf for TH-CR-270 - -
AAA80602-1 Perforated shelf for TH-G-180/ TH-I-180/ TC-G-180 -
AAA80602-2 Perforated shelf for TH-G/I/GU-300, TC-G/GU-300 -
AAA80602-3 Perforated shelf for TH-G-408/ TH-I-408/ TC-G-408 -
AAA80602-4 Perforated shelf for TH-G-800/ TH-I-800/ TC-G-800 - -
AAA80602-5 Perforated shelf for TH-G-1000/ TH-I-1000/ TC-G-1000 - -
AAA80610 Cable port (Ø50mm/ 2.0")
AAA80611 Cable port (Ø80mm/ 3.2")
AAA80621 Water purifier -
AAA80622 Water cartridge tank -
RTD0794 Humidity sensor -
CFA1910 Temperature sensor (RTD type)
EDA9175 ULPA filter (optional) - - -
EDA9184 HEPA filter (1EA included) - - -
for TH-ME/ PE and TC-ME series
Cat. No. Description Models
TH-ME TH-PE TC-ME
AAA80500 Recorder (6 points)
AAA80540 Interface converter included a cable (5m/ 16.4ft)
AAA80542 Interface cable (5m/ 16.4ft)
AAA80550 Warning signal lamp
RTD0676 Wire shelf for TH-ME-025/ TH-PE-025/ TC-ME-025
RTD0680 Wire shelf for TH-ME-065/ TH-PE-065/ TC-ME-065
RTD0681 Wire shelf for TH-ME-100/ TH-PE-100/ TC-ME-100
AAA80602-6 Perforated shelf for TH-ME-025/ TH-PE-025/ TC-ME-025
AAA80602-7 Perforated shelf for TH-ME-065/ TH-PE-065/ TC-ME-065
AAA80602-8 Perforated shelf for TH-ME-100/ TH-PE-100/ TC-ME-100
AAA80610 Cable port (Ø50mm/ 2.0")
AAA80611 Cable port (Ø80mm/ 3.2")
AAA80631 Stand for TH-ME-025/ TH-PE-025/ TC-ME-025
AAA80632 Stand for TH-ME-065/ TH-PE-065/ TC-ME-065
AAA80633 Stand for TH-ME-100/ TH-PE-100/ TC-ME-100
AAA80634 Two step stand for TH-ME-025/ TH-PE-025/ TC-ME-025
AAA80635 Two step stand for TH-ME-065/ TH-PE-065/ TC-ME-065
RTD0794 Humidity sensor -
CFA1910 Temperature sensor (RTD type)
※ 80mm cable access hole in NOT available for 25L chambers. (TH-ME/PE-25, TC-ME-25)
Wire & Perforated shelves for Temperature (& Humidity) chambers
Models Description
Included * Maximum Dimensions (WXL)
TH-G/ I-180, TC-G-180 2 9 463×518mm (17.2×20.4”)
TH-G/I/GU-300, TC-G/GU-300 2 10 518×558mm (20.4×22.0”)
TH-G/ I-408, TC-G-408 2 10 560×740mm (22.0×29.1”)
TH-G/ I-800, TC-G-800 2 14 750×960mm (30.0×37.8”)
TH-G/ I-1000, TC-G-1000 2 14 950×960mm (37.4×37.8”)
TH-ME/ PE-025, TC-ME-025 2 7 195×310mm (7.7×12.2”)
TH-ME/ PE-065, TC-ME-065 2 10 280×360mm (11.0×14.2”)
TH-ME/ PE-100, TC-ME-100 2 10 330×460mm (13.0×18.1”)
TH-CR-270 2 10 640×558mm (25.2×22.0")
※ Only for wire shelf


Stainless steel and electro polished shelf system is removed easily without using tools for easy cleaning.
Models Description Cat. No.
Included Maximum Dimensions (WXL)
GC-300TL
GC-300TLH
3 15 466×490mm (18.3×19.3”) EDA8220
GC-1000TLH 6 30 770×580mm (30.3×22.8”) EDA8222



Stainless steel shelf system is removed easily without using tools for easy cleaning.
Models Description Cat. No.
Maximum Dimensions (WXL)
GC-300TL
GC-300TLH
15 466×490mm (18.3×19.3”) AAAA1511
GC-1000TLH 30 770×580mm (30.3×22.8”) AAAA1512



Recording range: -60 to 150℃/ 0 to 100% RH
Paper wide: 100mm
Portable type
6 dots (Temperature: 5 dots, Humidity: 1 dot)
Digital display
Free power supply (100V to 240V)
Cat. No. Description Suitable for
All GC series Recorder (6 points) AAAA1501

 
Digital CO2 controlling system, which supplies into the plant growth chamber
 
Cat. No. Description Suitable for
All GC series CO2 control system AAAA1521
※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us for details.
terma of use and legal restrictions privacy
Copyright © Jeiotech. All Rights Reserved.
4F HOSU B/D, 379-13, SEOGYO-DONG, MAPO-KU, SEOUL, REPUBLIC OF KOREA. (121-839)
TEL : +82-(0)2-3143-1823, 1825 / FAX : +82-(0)2-3143-1824
logo