产品
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
储藏柜(Storage)
- HOME
- > 产品
- > 储藏柜(Storage)
- 灭菌锅(Autoclaves)
- 恒温水浴&循环浴槽(Baths & Circulators)
- 防潮箱(Desiccators)
- 恒温恒湿环境箱(Environmental Chambers)
- 旋转式混匀仪(Rotator)
- 通风柜(Fume Hoods)
- 干浴器/金属浴(Heating & Cooling Block)
- 加热磁力搅拌器(Hotplate Stirrers)
- 培养箱(Incubators)
- 搅拌器(Mixers)
- 烘箱(Oven)
- 泵(Pumps)
- 摇床(Shakers)
- 温度试验箱(Temperature Chambers)
- 冷却水循环装置(Recirculating Coolers)
- 冷藏箱 & 低温保存箱(Refrigerators & Freezers)
- 恒温恒湿环境箱(Special Purpose Chamber)
- 储藏柜(Storage)
- 工业设备(Industrial Test Equipment)
- 高低温试验箱 桌上型 (TC3-KE)
- 高低温试验箱 桌上型 (TC3-ME)
- 恒温恒湿试验箱 桌上型 (TH3-KE)
- 恒温恒湿试验箱 桌上型((TH3-ME)
- 恒温恒湿试验箱 桌上型(TH3-PE)
- 恒温恒湿试验箱 Economic type (TH3-E)
- 强制对流烘箱 (编程型)
- 强制对流烘箱 (通用型)
- 洁净型干燥箱-100级 (General)
- 洁净型干燥箱-100级 (Programmable)
- 高温试验箱 (落地型 - LBV )
- 高温试验箱 (落地型 - LTV)
- 高低温试验箱 (落地型 - KBD)
- 高低温试验箱 (落地型 - KMV)
- 高低温试验箱 (落地型 - JMV)
- 高低温试验箱 (落地型 - PBV)
- 高低温试验箱 (落地型 - PMV)
- 高低温试验箱 (落地型 - LCH)
- 高低温试验箱 (落地型 - LCH-G)
- 冷却水循环装置 (通用型)
- 冷却水循环装置 (低温型)
- 冷却水循环装置 (高端低温型)
- 冷却水循环装置 (高温型)
- 恒温恒湿环境箱 (TH-G)
- 恒温恒湿环境箱 (TH-KH)
- 恒温恒湿环境箱 (TH-TG)
- 药品稳定测试试验箱 (TH-ICH)
- 洁净型恒温恒湿箱(TH-CR)
- 植物生长箱 (GC)
- 塑料器皿 & 其它(Plastic ware)
- LC GreenBox
Control range
- Temperature range from -5 to 100°C Humidity range from 10 to 95% RH
- Temperature range from -5 to 100°C Humidity range from 20 to 95% RH
Performance
- Microprocessor PID control / Temperature calibration / Automatic tuning.
- Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
- Water recycling system reduce water consumption for longer operation.
- Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
- Two-point door latch also enhances tightness to door closure. - Energy efficiency is achieved by optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.
Safety
- Built in door lock with a key.
- Automatic shut off after overheat alarm.
- Low and empty water level alarm.
- Power supply leakage breaker.
- Over current protection.
- Open door alarm.
-
LCD controller
-
Computer panel
-
Viewing window
-
Portable water container
Convenience
- Spacious chamber volume with a maximum capacity of 1500L.
- Various volume sizes, available to suit any users’ need. - Corrosion resistance stainless steel chamber and electric polished humidification tank.
- Maintenance of water supply are easily performed with a front water tank.
- Portable water container makes supplying water convenient. - Water supply during operation is also available for long term test purposes.
- Direct water system provides user great convenience when performing long-term tests. (optional)
- Clear observation of samples.
- Tempered glass door with built in heating wire.
- Energy efficient, long life span LED lighting.
- Wider view, inner glass door is available for monitoring of samples. (optional) - Cable port for introduction of external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports, custom ordered. (optional) - Casters for easy mobility during installation or relocation.
- User friendly LCD controller.
- Colorful interactive touch type LCD controller.
- Set point temperature and present temperature are clearly shown together on display.
- Sufficient programmable control support.
- Operating progress can be shown in graph mode for better data understanding.
- Automatic start/stop can be programmed for unattended operations.
- Display indicates abnormal temperature changes or power failures.
- Selective bilingual language support.
(Korean / English or English / Chinese, selectable only when placing an order)
- Temperature and other operating parameters can be recorded using a six channel digital recorder.(optional) - Computer interface.
- RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
- Program patterns are simple to set with the use of our software.
- Easy to check status of real-time operations. Graph data supports easy understanding.
- Storage and documentation of programs.
- Data with saving capabilities in excel and text format.
- Storage of program information, backup of value settings, recovery, and temperature values.
- RS-232 communication port as standard offer.
Description | No |
---|---|
Programmable pattern capacity | 100 |
Pattern repeat time | 999 |
Part repeat time | 255 |
Max. segments per a pattern | 100 |
Available max. segments* | 2000 |
Programmable process time per a segment | 0 to 99 hr. 59 min. |
* It is possible to set 100 segments per pattern, but the maximum number of segments is not 10,000 (100 pattern x 100 segment) but 2,000.
Control range
- Temperature range from -40 to 150°C Humidity range from 25 to 95% RH
Performance
- Microprocessor PID control / Temperature calibration / Automatic tuning.
- Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
- Water recycling and filtering system reduce water consumption for longer operation.
- Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
- Two-point door latch also enhances tightness to door closure. - Energy efficiency is achieved by optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.
Safety
- Built in door lock with a key.
- Automatic shut off after overheat alarm.
- Low and empty water level alarm.
- Power supply leakage breaker.
- Over current protection.
- Open door alarm.
-
Color LCD controller
-
Computer interface
-
Door handle
-
Portable water container
Convenience
- Spacious chamber volume with a maximum capacity of 1500L.
- Various volume sizes, available to suit any users’ need. - Corrosion resistance stainless steel chamber and electric polished humidification tank.
- Maintenance of water supply are easily performed with a front water tank.
- Portable water container makes supplying water convenient. - Water supply during operation is also available for long term test purposes.
- Direct water system provides user great convenience when performing long-term tests. (optional)
- Clear observation of samples.
- Tempered glass door with built in heating wire.
- Energy efficient, long life span LED lighting.
- Wider view, inner glass door is available for monitoring of samples. (optional) - Cable port for introduction of external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports, custom ordered. (optional) - Casters for easy mobility during installation or relocation.
- User friendly LCD controller.
- 5.7 inch colorful interactive touch type LCD controller.
- Set value and present value are clearly visible together on display.
- Operating progress visible in graph mode allow for direct data interpretation.
- Built-in SD card drive.
- Trilingual support. (English / Chinese / Korean)
- Temperature and other operating parameters recorded with use of selectable recorder. (optional)
- Sufficient programmable control support.
Description | No |
---|---|
Programmable pattern capacity | 120 |
Pattern repeat time | 999 |
Max. segments per a pattern | 100 |
Available max. segments* | 1200 |
Programmable process time per a segment | 0 to 999hr. 59 min. 59 sec. |
* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment an patterns properly.
- Computer interface.
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings, recovery, temperature, humidity values.
- RS-232 communication port comes standard.
Specification (Basic type)
Model |
SC-EF-1912D2 | SC-EF-1906D1 |
---|---|---|
Internal volume (L / cu ft) | 1047 / 37.0 | 521 / 18.4 |
Interior dimensions (W x D x H, mm / inch) |
1198 x 500 x 1748 / 47.2 x 19.7 x 68.8 |
597 x 500 x 1748 / 23.5 x 19.7 x 68.8 |
Exterior dimensions (W x D x H, mm / inch) |
1253 x 593 x 2039 / 49.3 x 23.3 x 80.3 |
653 x 597 x 2039 / 25.7 x 23.3 x 80.3 |
Quantity of shelf (standard / max.) |
3 / 5 | 3 / 5 |
Distance of between shelves (mm / inch) |
400 / 15.7 | 400 / 15.7 |
Max. load (kg / lbs) | 80 / 176.3 | 80 / 176.3 |
CE certification | 288 / 634.9 | 180 / 396.8 |
Weight (kg / lbs) | 185 / 407.9 | 170 / 374.8 |
Cat. No. | AAAF31517 | AAAF31514 |
Product appearance | ||
Product interior |
1) Drawer Type is the maximum load for the Drawer.
Accessories (Type 60)
Accessory | Description (W x D x H, mm / inch) |
SC-EF-1912D2 | SC-EF-1906D1 |
---|---|---|---|
Shelf | Epoxy powder coated steel (1194 x 460 x 48 / 47 x 18.1 x 1.9) |
AAAF35018 | - |
Epoxy powder coated steel (594 x 460 x 48 / 23.4 x 18.1 x 1.9) |
- | AAAF35017 | |
Stainless steel (1194 x 460 x 48 / 47 x 18.1 x 1.9) |
AAAF35008 | - | |
Stainless steel (594 x 460 x 48 / 23.4 x 18.1 x 1.9) |
- | AAAF35007 | |
Tray | PP (545 x 419 x 33 / 21.5 x 16.5 x 1.3) |
00SCF0000037 | 00SCF0000037 |
Extraction Module (EM-33) (230V, 60Hz) |
348 x 498 x 343 mm / 13.7 x 19.6 x 13.5 inch |
AAAF1536 | AAAF1536 |
Bottom Collecting Pump Specification by Model
Model | Description (W x D x H, mm / inch) |
---|---|
SC-EF-1912D2 | 1194 x 484 x 92 / 47.0 x 19.1 x 3.6 |
SC-EF-1906D1 | 594 x 484 x 92 / 23.4 x19.1 x 3.6 |
※ Choose one between a epoxy powder coated steel and a stainless steel steel material
-
Shelf
-
Bottom Collecting Sump
-
Tray (PP)
-
Drawer
-
Fume Extraction Module
(EM-33) -
Plinth (Side) + EM-33
相关产品
询价